Category Archives: Download

Honeywell CC-TCF901 | CF9 Control Firewall IOTA Termination Base for CC-PCF901 FTE Module Experion PKS Series C – Field Service Notes

Component Snapshot At-a-Glance Model: CC-TCF901, factory P/N 51403427-175 Alt. P/N: DC- (conformal coated offshore variant, same pinout; CC-HCN911 horizontal FTE hub base, incompatible CF9 hardware) Product Series: Honeywell Experion PKS Series C FTE Fault Tolerant Ethernet cabinet hardware, matched to CC-PCF901 CF9 firewall module Hardware Type: Passive rack-mount CF9 dedicated IOTA termination base, hot-swap compatible…

Honeywell CC-PCF901 | CF9 9-Port FTE Control Firewall Module Experion PKS Series C C300 – Field Service Notes

Component Snapshot At-a-Glance Model: CC-PCF901, factory P/N 51405047-175 Alt. P/N: No direct cross-substitute; standard IT switches cannot replace CF9 control firewall functionality Product Series: Honeywell Experion PKS Series C FTE Fault Tolerant Ethernet platform, paired with C300 FTE controllers Hardware Type: Rack-mount 9-port hardened control firewall/FTE distribution module, hot-swap capable, mounts exclusively to CC-TCF901 CF9…

Honeywell CC-PAIM01 | 16 Channel Low Level mV Analog Input MUX Module Experion PKS C300 Series C – Field Service Notes

Component Snapshot At-a-Glance Model: CC-PAIM01, factory P/N 51405045-175 Alt. P/N: CC-TAIM01 (FTE backplane low level MUX, backplane/IOTA incompatible); CC-PAIX02 (4-20mA HART high level AI, cannot read mV thermocouple signals) Product Series: Honeywell Experion PKS Series C standard non-FTE I/O, paired with C300 non-FTE controllers Hardware Type: Rack-mount 16-channel low-level millivolt multiplexer AI module, hot-swap capable,…

Honeywell CC-TDOB01 | Simplex 32CH Bussed DO IOTA Termination Base for CC-PDOB01 Experion PKS Series C – Field Service Notes

Component Snapshot At-a-Glance Model: CC-TDOB01, factory PWA P/N 51308371-175 Alt. P/N: CC-TDOB11 (12” redundant dual-IOM IOTA, cannot cross-substitute simplex racks); CC-TXOBxx (FTE DO IOTA, backplane pinout incompatible) Product Series: Honeywell Experion PKS Series C standard non-FTE I/O rack hardware Hardware Type: Simplex single-IOM slot termination IOTA baseboard, rack-mounted, hot-swap compatible with CC-PDOB01 Key Feature: Jumper…

Honeywell CC-PAIX02 | 16 Channel HART Isolated Analog Input Module for Experion PKS C300 I/O – Field Service Notes

Component Snapshot At-a-Glance Model: CC-PAIX02 Alt. P/N: CC-PAIH02 (pinout incompatible upgrade variant); legacy MC-PAIH03 (TDC3000 HPM platform, non-interchangeable) Product Series: Honeywell Experion PKS Series C I/O, paired with C300 Process Controllers Hardware Type: Rack-mount analog input module, hot-swap capable, requires dedicated IOTA terminal base Key Feature: 16 mixed single/differential isolated channels with native HART 5/7…

Honeywell 51402455-100 DNCF | Dual Node Card File Chassis Backplane for TDC3000/TPS DCS – Field Service Notes

Component Snapshot At-a-Glance Model: 51402455-100 (Internal designation MP-DNCF02-201, DNCF Dual Node Card File Backplane) Alt. P/N: 51401477-100 single-node backplane, non-interchangeable; this part supports dual-node redundant architecture only Product Series: Honeywell TDC3000 / TPS LCN Local Control Network classic chassis Hardware Type: Passive multi-layer PCB backplane, full DNCF card cage carrier with integrated fan mounting frame…

Honeywell 51403645-100 SBHM | Single Board History Module for TDC3000/TPS LCN Nodes – Field Service Notes

Component Snapshot At-a-Glance Model: 51403645-100 (SBHM, Single Board History Module) Alt. P/N: 51403698-100 dual-drive SBHM variant; legacy multi-card disk subsystems cannot cross-substitute Product Series: Honeywell TDC3000 / TPS LCN Local Control Network Hardware Type: Full-width rack slot integrated storage processor board, hot-swap capable Key Feature: Onboard 1.8GB SCSI hard drive + dedicated history CPU, eliminates…

Honeywell 51401583-100 EPNI | NIM Main Logic LCN-UCN Bridge Board for TDC3000/TPS DCS – Field Service Notes

Component Snapshot At-a-Glance Model: 51401583-100 (EPNI, Enhanced Process Network Interface, NIM main logic board) Alt. P/N: Legacy PNI 51401582-100 + PNM modem split board pair; cannot cross-substitute Product Series: Honeywell TDC3000 / TPS LCN + UCN dual network NIM chassis Hardware Type: Full-width rack slot main processor board for Network Interface Module (NIM) Key Feature:…

Honeywell 51306673-100 EPNI | Ethernet Peripheral Network Interface Card for TDC3000/TPS DCS – Field Service Notes

Component Snapshot At-a-Glance Model: 51306673-100 (Internal designation EPNI, Enhanced Processor Node Interface) Alt. P/N: No direct cross-replacement; older ENB Ethernet boards lack full LCN traffic offload capacity Product Series: Honeywell TDC3000 / TPS LCN Local Control Network DCS Hardware Type: Full-width rack slot Ethernet gateway processor board, hot-swap capable Key Feature: Dedicated on-board communication CPU…

Honeywell 51305072-200 | CLCN-A Primary LCN Paddle Board for TDC3000/TPS DCS – Field Service Notes

Component Snapshot At-a-Glance Model: 51305072-200 (CLCN-A) Alt. P/N: 51305072-300 (CLCN-B secondary redundant counterpart) Product Series: Honeywell TDC3000 / TPS LCN Local Control Network Hardware Type: Single-width slot LCN primary coax paddle board, hot-swap capable Key Feature: Factory calibrated 75Ω impedance matching for primary LCN-A trunk coax with on-board signal equalization Primary Field Use: Provide primary…