Component Snapshot At-a-Glance Model: Alt. P/N: No factory alternate part number, direct cross to legacy UES815S power unit Product Series: Emerson CSI Machinery Health / DeltaV Condition Monitoring Rack Series Hardware Type: Plug-in eddy current probe regulated power driver module Key Feature: Precision ±1% stabilized 5VDC excitation tailored for non-contact eddy probe field wiring loops…
Component Snapshot At-a-Glance Model: Alt. P/N: 12P0818X072,12P0818X092 Product Series: Emerson DeltaV M-Series Standard I/O System Hardware Type: Passive 8-wide terminal base carrier with full-length integrated EMI shield bar Key Feature: Integrated metal shield bar bonded to chassis ground to suppress cabinet-borne EMI noise from variable frequency drives Primary Field Use: Mounts 8 individual DeltaV plug-in…
Component Snapshot At-a-Glance Model: KL4201X1-BA1 Alt. P/N: SE4601T07 Product Series: Emerson DeltaV IS-CHARM Electronic Marshalling System Hardware Type: Intrinsically Safe 16-slot passive CHARM baseplate Key Feature: Built-in galvanic intrinsic safety barrier routing for Class I Div2 field wiring, no onboard processing chip Primary Field Use: Mechanically mounts up to 16 individual IS-CHARM modules, distributes bus…
Component Snapshot At-a-Glance Model: KJ4002X1-BC1 Alt. P/N: 12P1729X042 Product Series: DeltaV M-Series Standard I/O System Hardware Type: Passive 4-slot vertical I/O carrier backplane Key Feature: Interlocking flat ribbon bus for multi-carrier rack expansion, no onboard power regulation circuitry Primary Field Use: Houses up to four DeltaV I/O modules and corresponding field terminal bases, distributes backplane…
Component Snapshot At-a-Glance Model: A6110 Alt. P/N: 9199-00001 Product Series: AMS 6500 (A6000 Machinery Health Monitor) Hardware Type: Dual-channel shaft relative vibration monitor (3U, 1-slot) Key Feature: API 670 compliant, hot-swap, 0.1Hz–16kHz, eddy current sensor interface Primary Field Use: Monitors relative shaft vibration on turbines, compressors, and high-speed rotating assets Hard-Numbers: Technical Specifications Channel…
Component Snapshot At-a-Glance Model: KJ3222X1-BA1 Alt. P/N: 12P2532X072, VE4003S2B3 Product Series: DeltaV KJ / Series 2 HART I/O Hardware Type: 8-channel analog input (AI) module, HART-capable Key Feature: 1500VDC channel-to-channel isolation, HART 5/7, hot-swap Primary Field Use: Reads 4-20mA from transmitters; provides HART diagnostics in DeltaV DCS
Component Snapshot At-a-Glance Model: KL4201X1-BA1 Alt. P/N: 12P2506X042 (Emerson) Product Series: DeltaV KL Series (CHARM Baseplates) Hardware Type: Intrinsically Safe (I.S.) CHARM Baseplate Key Feature: ATEX/IECEx/FM/UKEX certified, 8-channel capacity, DIN rail mount Primary Field Use: Carries DeltaV IS-CHARM I/O modules in Class I/Div.1 hazardous zones Hard-Numbers: Technical Specifications Backplane Power: 6.3VDC @ 4A (bus)…
Component Snapshot At-a-Glance Model: PR6423/004-030 Alt. P/N: 9199-00004 (Emerson), EPRO /004-030 Product Series: (EPRO/Emerson) Eddy Current Sensors Hardware Type: Non‑contact eddy current displacement probe Key Feature: 8mm linear range, integral 5m high‑temp cable, M10×1 mounting Primary Field Use: Measures radial vibration, shaft displacement, and eccentricity on steam/gas turbines and compressors Hard-Numbers: Technical Specifications Measurement…
Component Snapshot At-a-Glance Model: A6210 (also 9199-00003) Alt. P/N: EPRO Product Series: AMS 6500 Machinery Health Monitor Hardware Type: Dual-channel thrust/expansion/rod position monitor Key Feature: 40ms fault response, API 670/618 compliant Primary Field Use: Protects turbines/compressors from axial contact & thermal expansion damage
Product Core Brief Model: PR6423/015-010 Brand: EPRO (Emerson) Series: Core Function: Non‑contact measurement of shaft vibration, displacement, and eccentricity on rotating machinery. Product Type: 8mm Eddy Current Sensor Key Specs: 8 V/mm sensitivity | 0.5–2.5 mm linear range | 1.5 m integral cable Note: New original, requires CON021 signal conditioner for operation.