Product Core Brief
- Model: BGTR8HE 24491276A1004
- Brand: ALSTOM
- Series: ALSTOM Industrial Control / VME Platform
- Core Function: VME rack / controller module used for industrial automation, power equipment control, and process system integration.
- Product Type: VME Rack / Controller Module
- Key Specs: 8-slot VME rack | Industrial control platform | High reliability and anti-interference design
- Condition: New Original / New Surplus
Product Introduction
ALSTOM BGTR8HE 24491276A1004 is an ALSTOM industrial control module identified in spare parts listings as a VME rack / controller module. It is commonly referenced as an 8-slot VME rack used in automation, power generation, turbine control, and process control systems.
The module provides a robust mechanical and electrical platform for mounting control cards, processing field signals, and supporting system communication. Exact slot configuration, backplane type, power rating, and supported card families should be confirmed from the installed nameplate or system documentation before replacement.
Key Technical Specifications
| Parameter | Value |
|---|---|
| Full Model | ALSTOM BGTR8HE 24491276A1004 |
| Product Type | VME Rack / Controller Module |
| System Platform | ALSTOM Industrial / VME Control Platform |
| Slot Configuration | 8-slot VME rack (reported) |
| Core Function | Module housing, backplane interface, system control support |
| Application | Industrial automation, power control, turbine/process systems |
| Supply Voltage | Confirm per installed nameplate |
| Backplane Type | VME bus (variant-dependent) |
| Operating Temperature | Confirm per installed system rating |
| Form Factor | Rack-mount / slot-in industrial module |
| Installation | Backplane or cabinet-mounted module |
Quality Control Process
- Visual and revision check: Inspect rack housing, backplane connectors, front hardware, and BGTR8HE / 24491276A1004 labeling.
- Backplane continuity check: Verify slot pin integrity, bus continuity, and connector condition before inserting control cards.
- Power rail verification: Check supply voltage and insulation with a multimeter according to the installed system rating.
- Slot and communication test: Confirm each slot can accept and communicate with the required control cards.
- Final packing: Record test results, apply asset labels, and ship in anti-static packaging with connector and edge protection.
Replacement Pitfall Guide
❗ Confirm whether it is a rack or a controller card. BGTR8HE 24491276A1004 is listed both as a VME rack and as a controller/utility module; the exact function must be verified on the nameplate.
❗ Match the backplane and slot rules. An 8-slot VME rack must support the same bus type and card dimensions as the original installation.
❗ Verify power and grounding. Incorrect supply voltage or poor grounding can damage inserted control cards.
❗ Check card compatibility before commissioning. Even if the rack fits, the installed controller or I/O cards may require specific firmware or address settings.
Keep these in mind and you’ll cut 90% of rework time.
Compatibility Matrix & Benchmarks
| Original Model | Replacement / Successor Model | Compatibility Level | Migration Notes |
|---|---|---|---|
| ALSTOM BGTR8HE 24491276A1004 | ALSTOM BGTR8HE 24491276A1004 | Direct | Like-for-like replacement when slot count, backplane, and power match. |
| ALSTOM BGTR8HE 24491276A1004 | ALSTOM VME rack / controller module | Needs Adaptation | Confirm VME bus type, slot count, power supply, and card compatibility. |
| ALSTOM BGTR8HE 24491276A1004 | ALSTOM successor control platform | Needs Adaptation | Requires verification of backplane, I/O mapping, and control logic migration. |
- Typical use: VME rack / controller module for industrial automation, power equipment control, and process system integration.
- Key verification points: 8-slot VME configuration, backplane type, supply voltage, card compatibility, and nameplate confirmation.
