Product Core Brief

• Model: 113-40060
• Brand: VIBRO-METER
• Series: VM600 / VM600 Mk2 Machine Monitoring System
• Core Function: Accessory / spare part for the VM600 RPS6U rack power supply module.
• Product Type: VM600 RPS6U Power Supply Accessory
• Key Specs: Used with RPS6U 6U rack power supply | Supports VM600 / VM600 Mk2 ABE04x racks | Exact function depends on accessory type
• Condition: New Surplus

Product Introduction

VIBRO-METER 113-40060 is listed as an accessory for the VM600 RPS6U rack power supply module. The RPS6U family is the standard 6U front-mounted power supply for VM600 and VM600 Mk2 ABE04x system racks, providing +5 VDC and ±12 VDC to the rack backplane and all installed modules.

The 113-40060 number appears in third-party spare parts listings as an RPS6U-related accessory, but its exact role is not fully confirmed from publicly available documentation. It may be a mounting accessory, connector kit, wiring harness, terminal block, jumper set, or other auxiliary component associated with the RPS6U power supply. Because this number does not match the standard RPS6U module part numbers such as 200-582-200-011 or 200-582-600-013, the specific function should be confirmed from the physical label, packing list, or Vibro-Meter documentation before installation.

Key Technical Specifications

Note: The exact accessory type, revision, and installation method for 113-40060 should be verified against the module nameplate, original packaging, or official Vibro-Meter documentation.

Quality Control Process

Each unit begins with a visual inspection of the part number label, physical condition, connectors, terminals, and any associated hardware for damage, corrosion, or missing components. The accessory is cross-checked against the RPS6U module and rack type to confirm mechanical and electrical compatibility.

If the item is a connector, harness, or terminal component, pin alignment, contact integrity, and insulation are verified. If it is a mounting or jumper accessory, fitment is checked against a compatible RPS6U module. Final packing uses anti-static bags, foam inserts, and sealed cartons to protect the accessory during shipment.

Replacement Pitfall Guide

❗ Confirm the exact accessory type. The number 113-40060 is listed as an RPS6U accessory, but it is not a standard RPS6U module part number. Verify whether it is a connector, harness, terminal block, jumper, or mounting component.

❗ Match it to the correct RPS6U revision. RPS6U modules have multiple variants such as 200-582-200-011 and 200-582-600-013. Accessories may differ between revisions in connector type, pinout, or mounting configuration.

❗ Do not treat it as a full power supply replacement. If the RPS6U module itself has failed, 113-40060 alone may not restore rack power. Confirm whether the main RPS6U module also needs replacement.

❗ Verify rack compatibility before installation. The accessory must match the VM600 ABE04x 6U rack and the installed RPS6U hardware. Installing an incompatible accessory can prevent proper seating or cause connection faults.

❗ Check documentation before energizing the rack. If the accessory affects power input, backplane connection, or terminal wiring, confirm the correct installation method to avoid short circuits or power interruptions.

Keep these in mind and you’ll cut 90% of rework time.

Compatibility Matrix & Benchmarks

Benchmark notes:

• Listed as a VM600 RPS6U power supply accessory.
• Used with VM600 / VM600 Mk2 ABE04x 6U racks.
• Not a standalone power supply; function must be confirmed from the label or documentation.

If you can share a photo of the nameplate or the packing label, I can help refine the exact accessory type and the correct replacement description.