Product Core Brief
- Model: DSI1817
- Part Codes: TRVC062335000 / CP00003934
- Brand: ALSTOM
- Series: ALSTOM Legacy Rack / VPS-related Control Platform
- Core Function: Plug-in control module for signal processing, logic execution, and equipment status handling in legacy ALSTOM rack systems.
- Product Type: Control Module / Plug-in Control Card
- Key Specs: Backplane-powered | 24 V DC system | Direct rack swap | Legacy ALSTOM cabinet compatible
- Condition: New Original / New Surplus
Product Introduction
ALSTOM DSI1817, identified under part codes TRVC062335000 and CP00003934, is a plug-in control module used in legacy ALSTOM rack-based systems. It is commonly referenced as a control card for railway signaling, traction/converter cabinets, power generation balance-of-plant systems, substation automation, and industrial process control environments.
The module integrates into ALSTOM backplanes and typically draws power from the host rack, avoiding the need for additional field power supplies. It supports direct like-for-like replacement when the cabinet code, slot mapping, and firmware match the installed system. Because detailed I/O counts, firmware versions, and application-specific functions can vary by installation, final confirmation should be made from the installed nameplate and system documentation.
Key Technical Specifications
| Parameter | Value |
|---|---|
| Full Model | ALSTOM DSI1817 |
| Part Codes | / |
| Product Type | Plug-in Control Module / Control Card |
| System Platform | ALSTOM Legacy Rack / VPS-related Control Platform |
| Core Function | Signal processing, logic execution, status monitoring |
| Power Supply | Backplane-powered, typically 24 V DC system |
| Installation | Plug-in module for ALSTOM backplane/rack |
| Typical Applications | Rail signaling, traction control, power plant control, substation automation, industrial process cabinets |
| Warranty | 12 months reported for spare units |
| Origin | France reported |
Quality Control Process
- Visual and code check: Confirm DSI1817, TRVC062335000, and CP00003934 markings match site documentation and the replaced module.
- Backplane and connector inspection: Check edge connector, PCB condition, and rack slot contacts before insertion.
- Power rail verification: Verify host rack supply and insulation before energizing the module.
- Functional verification: Confirm module initialization, status LEDs, communication, and logic response under normal operating conditions.
- Final packing: Record test results, apply asset labels, and ship in anti-static packaging with connector protection.
Replacement Pitfall Guide
❗ Match both part codes. DSI1817 may appear with TRVC062335000 or CP00003934; confirm both codes against the installed module to avoid revision mismatches.
❗ Verify the host rack and slot rules. This is a plug-in module; incorrect slot placement or backplane incompatibility can prevent commissioning.
❗ Don’t assume I/O or firmware behavior. Public listings describe general control functions, but the exact logic, addressing, and diagnostics depend on the installed ALSTOM platform.
❗ Confirm safety and interlock impact. In rail signaling, traction, or protection systems, replacement may require supervised testing before returning the cabinet to service.
Keep these in mind and you’ll cut 90% of rework time.
Compatibility Matrix & Benchmarks
| Original Model | Replacement / Successor Model | Compatibility Level | Migration Notes |
|---|---|---|---|
| ALSTOM | ALSTOM | Direct | Like-for-like replacement when rack, slot, and firmware match. |
| ALSTOM DSI1817 | ALSTOM DSI1817 variant | Needs Adaptation | Confirm TRVC062335000 / CP00003934 code, firmware, and I/O mapping. |
| ALSTOM DSI1817 | ALSTOM successor control module | Needs Adaptation | Requires verification of backplane compatibility, control logic, and cabinet integration. |
- Typical use: Legacy ALSTOM rack systems for rail signaling, traction/converter control, power plant control, substation automation, and industrial process cabinets.
- Key verification points: TRVC062335000 / CP00003934 codes, host rack model, slot position, firmware revision, and backplane compatibility.
