Product Core Brief
- Model: 444-680-000-511
- Brand: VIBRO-METER
- Series: VM600 family / Meggitt vibration product — to be confirmed
- Core Function: Likely a VM600-related vibration sensor, signal conditioner, or monitoring component.
- Product Type: Vibration monitoring part / sensor assembly
- Key Specs: Pending datasheet | Pending sensor type | Pending electrical interface
- Condition: New original / new surplus — verify on label
Product Introduction
The VIBRO-METER 444-680-000-511 is listed as a Meggitt/Vibro-Meter vibration product, but its exact function cannot be confirmed without the original datasheet or nameplate. It may belong to the VM600 ecosystem or to Vibro-Meter’s sensor and signal-conditioning portfolio.
Do not assume channel count, sensitivity, cable type, connector, or compatibility with a specific VM600 rack. Treat this unit as a candidate spare and match it against the installed machine protection system before installation.
Key Technical Specifications
- Part number: 444-680-000-511
- Manufacturer: VIBRO-METER / Meggitt
- Product family: Pending confirmation
- Module/sensor type: Pending datasheet
- Measurement type: Pending datasheet
- Electrical interface: Pending datasheet
- Connector/cable type: Pending datasheet
- Supply voltage / excitation: Pending datasheet
- Operating temperature: Pending datasheet
- Mounting style: Pending datasheet
- Serial number / batch: Verify on label
- Condition: New original / new surplus — confirm before dispatch
Quality Control Process (Pending Verification)
- Nameplate verification: Confirm 444-680-000-511, revision, serial number, and product family.
- Mechanical inspection: Check housing, connector, cable strain relief, and mounting threads or brackets.
- Electrical check: Test insulation, continuity, and connector pin integrity.
- Functional verification: Only perform if the correct test fixture, sensor type, and approved procedure are available.
- Packing: Use anti-static protection for electronics, cushioned packaging for sensors, and moisture protection for shipment.
Replacement Pitfall Guide
❗ Do not substitute by partial part number. The “444-680-000-511” suffix may differ in sensitivity, cable length, connector, or calibration.
❗ Do not assume VM600 rack compatibility. This part could be a sensor, cable assembly, signal conditioner, or rack component.
❗ Verify sensor excitation and signal type before wiring. IEPE, proximity probe, velocity, and 4-20 mA interfaces are not interchangeable.
❗ Keep the original calibration record. Replacing a vibration sensor without documenting sensitivity or tag mapping can trigger false alarms.
Keep these in mind and you’ll cut 90% of rework time.
Compatibility Matrix & Benchmarks
| Original Model | Replacement / Successor Model | Compatibility Level | Migration Notes |
|---|---|---|---|
| VIBRO-METER 444-680-000-511 | Same part number, matching revision | Pending verification | Match label, revision, and calibration |
| VIBRO-METER 444-680-000-511 | Equivalent Vibro-Meter sensor/module | Unverified | Confirm sensor type and electrical interface |
| VIBRO-METER 444-680-000-511 | Newer VM600-compatible part | Pending OEM confirmation | Check Parker Meggitt/Vibro-Meter documentation |
Benchmarks: Pending datasheet. Typical comparisons include sensor type, sensitivity, frequency range, cable/connector type, supply voltage, and VM600 system compatibility, but none should be published here without official confirmation.
