Product Core Brief
- Model: AIP121-S00
- Brand: YOKOGAWA
- Series: CENTUM CS 3000 Communication / Interface Module
- Core Function: Communication interface module for YOKOGAWA CENTUM CS 3000 DCS system.
- Product Type: DCS Communication Module
- Key Specs: CENTUM CS 3000 compatible | Communication interface | S00 style | Plug-in FCS module
- Condition: New Original (New Surplus) / Factory Sealed
Product Introduction
Communication cards are often the least understood part of a DCS replacement, yet they sit between the controller and external networks or fieldbus segments. The is a YOKOGAWA CENTUM CS 3000 communication interface module, used within the Field Control Station to support system communication functions.
For maintenance and procurement teams, this module is typically sourced as an OEM replacement for aging or failed communication cards in CS 3000 systems. Because the AIP121-S00 is a less commonly referenced part number compared with ACF11, ALP111, ACM11, or ACM12, the exact communication protocol, slot position, and engineering configuration should be confirmed against the existing system label and project documentation before installation.
Key Technical Specifications
| Parameter | Value |
|---|---|
| Full Model | |
| Product Type | Communication Interface Module |
| Compatible System | YOKOGAWA CENTUM CS 3000 DCS |
| Installation | Plug-in FCS module |
| Style/Revision | S00 |
| Typical Application | System communication interface within CENTUM CS 3000 FCS |
| Verification Required | Protocol type, slot assignment, firmware/project compatibility |
Note: Public product data for is limited. The exact protocol type and engineering role should be confirmed from the physical label, system manual, or existing FCS configuration before substitution.
Key Selling Points & Differentiators
- CENTUM CS 3000 compatibility: Designed for YOKOGAWA CS 3000 FCS racks.
- OEM replacement option: Suitable for maintenance spares or failed communication card replacement.
- Factory-sealed supply: Helps reduce storage and handling risk for long-term spares.
- S00 style identification: The S00 suffix helps confirm the hardware revision when matching existing cards.
- Not recommended for: Direct substitution with ACF11, ALP111, ACM11, ACM12, or CENTUM VP communication modules without engineering confirmation. Always verify protocol and slot configuration before ordering.
Quality Transparency SOP
Communication modules should be verified for both physical integrity and system compatibility.
- Incoming visual QA: Inspect factory sealing, label integrity, connector pins, PCB condition, and corrosion indicators.
- Label verification: Confirm full model and revision match the required configuration.
- Connector inspection: Check communication and backplane connectors for bent pins, oxidation, or mechanical damage.
- System compatibility check: Confirm slot position, communication protocol, and CENTUM CS 3000 project settings before installation.
- Final packing: Record serial/lot information, apply anti-static packaging, and seal with a condition label.
Technical Risk Avoidance
Confirm the exact function and protocol. AIP121-S00 is listed as a CENTUM CS 3000 communication module, but detailed public specifications are limited. Verify whether it is used for fieldbus, serial communication, or internal system interfacing before replacement.
Do not substitute freely with ACF11, ALP111, ACM11, or ACM12. These communication modules serve different roles within CENTUM systems and may not be interchangeable.
Match the FCS slot and engineering configuration. Communication cards often require specific slot assignments, address settings, or project downloads. Installing the card without confirming configuration can cause communication faults.
Verify system version. CENTUM CS 3000 hardware and software versions must be compatible. Confirm the existing system release before substitution.
Check redundancy and network role. If the card participates in a redundant communication path, replacement must follow the correct sequence to avoid process disturbance.
Buyer’s FAQ
Is this module genuine YOKOGAWA?
Yes. The is supplied as an OEM YOKOGAWA CENTUM CS 3000 communication module. We provide it as new original/new surplus unless otherwise stated.
What does AIP121-S00 do?
It is a communication interface module for CENTUM CS 3000 FCS. The exact protocol depends on the system configuration and should be confirmed from the existing card label or project documentation.
Can I replace ACF11, ALP111, or ACM11 with this module?
Not automatically. These are different communication modules. Substitution requires engineering confirmation.
What does S00 mean?
“S00” indicates the hardware style or revision. Always match it against the existing card before replacement.
What is the warranty and lead time?
Each module carries a standard 12-month functional warranty from shipment, excluding damage from incorrect installation, protocol mismatch, or wrong engineering configuration. In-stock units typically ship within 1–3 business days after payment confirmation.
