Product Core Brief
- Model: IC200GBI001
- Brand: GE (General Electric / GE Fanuc / Emerson Automation)
- Series: VersaMax PLC
- Core Function: Serves as a Genius Network Interface Unit (NIU), bridging VersaMax I/O stations to a Genius master controller for distributed I/O architectures.
- Product Type: Communication / Network Interface Module
- Key Specs: Genius Bus Protocol, 153.6 kbaud, Supports up to 64 I/O Modules, Redundant Bus Support
- Condition: New Original (New Surplus)
Key Technical Specifications
| Parameter | Value |
|---|---|
| Module Type | Genius Bus Interface (GBI) / NIU |
| System Compatibility | GE VersaMax PLC, 90-70 Series, PACSystems RX7i/RX3i |
| Communication Protocol | Genius I/O Bus |
| Transmission Speed | 153.6 kbaud |
| I/O Capacity | Up to 64 I/O modules (across 8 racks) |
| Data Processing | 128 bytes input + 128 bytes output per scan |
| Memory Capacity | 1024 Discrete I/O, 128 bytes Analog I/O |
| Bus Connection | Dual Genius Bus Terminals (Main + Redundant) |
| Operating Temp | 0°C to 60°C |
| Mounting | Standard DIN-Rail on VersaMax Carrier |
GE IC200GBI001
Product Introduction
Seamless integration of distributed I/O is critical for scalable and reliable process control. The is a specialized Genius Bus Interface module designed specifically for the VersaMax PLC platform. It acts as a Network Interface Unit (NIU), allowing a local VersaMax I/O station to communicate over the proven Genius I/O bus to a master controller.
Field engineers highly value the for brownfield upgrades and phased modernization programs. It scans multiple local VersaMax digital and analog modules as a single Genius device image, which drastically simplifies addressing and saves wiring. By retaining the existing Genius trunk infrastructure while refreshing the field I/O, maintenance teams can restore production with better diagnostics and zero rewiring.
Key Selling Points & Differentiators
- VersaMax & Genius Compatibility: Designed specifically to interface VersaMax I/O to Genius masters (90-70, RX7i, RX3i); not recommended for non-Genius networks.
- High-Density I/O Management: Capable of managing up to 64 I/O modules across 8 racks, consolidating field signals into a single network node.
- Built-In Redundancy: Features dual Genius bus terminals (main and redundant) to ensure high-availability communication in critical control environments.
- Hot-Swap Support: Allows VersaMax I/O modules to be serviced or replaced without powering down the entire network drop, significantly reducing downtime.
- Rigorous Live Bench Testing: Every unit undergoes a 24-hour continuous load test with Genius bus communication verification and I/O scanning simulation before shipping.
- New Surplus Availability: Factory-sealed condition with verified source traceability, bypassing typical OEM lead times for legacy VersaMax hardware.
- Anti-Counterfeit Verification: Serial numbers are checked against manufacturer databases during incoming inspection to guarantee authenticity.
GE IC200GBI001
FAQ
Yes. The is highly compatible and designed to work seamlessly with Genius bus controllers, including the GE 90-70 series and PACSystems RX7i/RX3i platforms. Always verify that the appropriate firmware version is loaded on both the controller and the NIU module before installation.
No. While both are Genius Network Interface Units for VersaMax, the operates at a faster transmission speed of 153.6 kbaud, whereas the IC200EBI001 operates at 38.4 kbaud. Substituting a slower module in a high-speed network can cause communication bottlenecks or bus faults. Always match the exact part number.
Do I need to configure the Genius bus address before installing?
Yes. The module requires configuration via GE toolsets such as Proficy Machine Edition. You must set the device addressing and configure the Genius bus parameters to match your system design. I always recommend backing up your control strategy and running a bus diagnostic scan after installation to confirm communication with all local I/O modules.
What happens if the main Genius bus cable fails?
Because the features dual Genius bus terminals, it supports redundant communication. If the main bus connection is severed or experiences a fault, the module will automatically utilize the redundant port to maintain communication with the master controller, preventing process disruption.
Is there a warranty on this new surplus unit?
Yes. All new surplus modules come with a standard 12-month functional warranty. If the unit fails during normal operation within that period, we provide a direct replacement. We also include our internal test report with every shipment so you can verify the 24-hour load test and bus communication results before installation.
