Product Core Brief
- Model: 330130-045-00-05
- Brand: Bently Nevada
- Series: 3300 XL Extension Cable
- Core Function: Connects a 3300 XL proximity probe to a 3300 XL proximitor, carrying the eddy-current signal for vibration, axial displacement, position, and Keyphasor measurements.
- Product Type: 3300 XL Extension Cable
- Key Specs: 4.5 m length | standard cable | no connector protector | multi-license approval
- Condition: New Original / New Surplus
Product Introduction
The Bently Nevada 330130-045-00-05 is a 3300 XL extension cable designed to link a 3300 XL proximity probe with a compatible 3300 XL proximitor. It has a 4.5 m cable length, standard cable construction, no connector protector, and multi-license agency approval.
This cable is commonly used in 3300 XL 8 mm vibration and displacement measurement channels. Its length must be combined with the probe cable length so that the total system length matches the proximitor calibration—typically 5.0 m, 7.0 m, or 9.0 m. The “00” cable option means it is a standard, non-armored cable without connector protectors, suitable for typical dry or protected installations. The “05” approval code indicates multi-license approval, which supports use in installations requiring certified agency compliance, subject to label verification.
Key Technical Specifications
| Parameter | Value |
|---|---|
| Manufacturer | Bently Nevada |
| Part Number | 330130-045-00-05 |
| Product Family | 3300 XL Extension Cable |
| Cable Length | 4.5 m (code 045) |
| Cable Option | 00 – Standard cable, no connector protector |
| Agency Approval | 05 – Multi-License Approval |
| Typical System Length | 5.0 m / 7.0 m / 9.0 m (probe cable + extension cable) |
| Compatible Probes | 3300 XL 8 mm proximity probes |
| Compatible Proximitor | 3300 XL 330180 series (verify calibration and system length) |
| Compatible Monitors | 3500/40M, 3500/42M, 3500/44M, 3500/25, 1900/65A, etc. |
Key Selling Points & Differentiators
- Exact 4.5 m length. Matches systems that require a 4.5 m extension cable to reach the correct total system length.
- Multi-license approval. The “05” code supports installations requiring certified agency approval, subject to label verification.
- Standard cable construction. A straightforward, non-armored variant for typical industrial installations without connector protectors.
- Drop-in 3300 XL compatibility. Works with standard 3300 XL probes and 330180-series proximitors without matched-component calibration.
- Clear boundary. This is an extension cable only—not a probe, not a proximitor, and not a complete sensor channel.
Quality Transparency SOP
- Part number verification. We confirm the label reads 330130-045-00-05 and matches the 3300 XL extension cable family.
- Length check. The cable is verified as a 4.5 m extension cable to avoid mismatches with 4.0 m, 5.0 m, or other lengths.
- Connector inspection. Both coax connectors are checked for bent pins, corrosion, loose shells, or damaged O-rings.
- Continuity and insulation check. Using a Fluke multimeter, we verify center conductor continuity and shield integrity from end to end.
- ESD-safe packing. The cable is coiled to the recommended bend radius, sealed in an anti-static bag, and foam-packed to prevent connector stress.
Technical Risk Avoidance
❗ Confirm total system length before installation. The probe cable length plus this 4.5 m extension cable must equal the proximitor system length—commonly 5.0 m, 7.0 m, or 9.0 m. A wrong total length can shift sensitivity and gap-voltage settings.
❗ Do not assume armored or connector-protected construction. Code “00” means standard cable without connector protectors. If the installation requires armor, FluidLoc, or connector protectors, this variant may not be suitable.
❗ Verify approval requirements for hazardous areas. The “05” code indicates multi-license approval, but the exact installation requirements—such as temperature class, IP rating, and voltage limits—must be verified against the physical label before commissioning in Zone 2 / Division 2 areas.
❗ Keep connectors clean and dry. Eddy-current signal integrity depends on reliable coax connections. Contaminated or damaged connectors can cause unstable gap voltage or false vibration readings.
❗ Do not cut, splice, or repair the cable. The 3300 XL extension cable has defined impedance and shielding characteristics. Any modification can degrade signal integrity and measurement accuracy.
Buyer’s FAQ
Is this a complete vibration sensor? No. This is only the extension cable. A complete channel also requires a compatible 3300 XL proximity probe and a 3300 XL proximitor.
Can I replace a 330130-040-00-05 with this? Not without checking length. The -040- variant is 4.0 m, while this unit is 4.5 m. Changing cable length affects total system length and may require recalibration.
Can I replace a 330130-045-00-00 with this? Electrically they are similar, but the approval code is different. The -00 variant has no special agency approval, while the -05 variant carries multi-license approval. Confirm whether your installation requires certified approval.
Can I replace a 330130-045-01-05 or 330130-045-02-05 with this? Not without checking cable construction. The -01- and -02- variants include armor or connector protectors, while this -00- variant is a standard cable without connector protectors.
Does this include the probe or proximitor? No. Unless explicitly stated, this listing covers the extension cable only.
Is this genuine Bently Nevada? Yes. We sell genuine surplus inventory. The part number is verified against the physical label before dispatch.
What warranty applies? Standard 12-month warranty against DOA and functional defects. Damage from incorrect installation, connector mismatch, cable crushing, or oil ingress is not covered.
