Description
Product Core Brief
- Model: 1X00569H01
- Brand: Westinghouse / Emerson Ovation
- Series: Ovation ELC Ethernet data link family
- Core Function: Provides Ethernet based data linking between an Ovation controller and third party systems or external networks.
- Product Type: Ethernet data connection card, ELC
- Key Specs: Ethernet data link | Commonly listed with 5X00419G01 and 5X00419G02 | Requires controller side configuration and protocol mapping
- Condition: New Surplus / Refurbished, nameplate photo required
Product Introduction
WESTINGHOUSE 1X00569H01 shows up in most spare lists as an Ovation ELC card, the Ethernet data connection module used to tie the control system to outside equipment. Supplier tables pair it with 5X00419G01 and 5X00419G02 under the ELC heading.
It does not read field sensors. It moves data, and it depends heavily on configuration. A plant that lost remote valve control through Modbus had to trace protocol address mapping and LC card setup before anything physical mattered. That is where most ELC outages actually live.
Key Technical Specifications
| Parameter | Value |
|---|---|
| Part Number | 1X00569H01 |
| Platform | Ovation DCS, Westinghouse heritage, Emerson production |
| Product Class | ELC Ethernet data connection card |
| Common Pairing | 5X00419G01, 5X00419G02 listed as ELC hardware |
| Typical Use | Data exchange with third party systems, PLCs and external networks |
| Configuration Dependency | Controller side point mapping, protocol addressing and node setup |
| Common Failure Signs | Lost comms, stale data, no remote command response, card not seen by controller |
| Related Cards Often Confused | LC serial link cards 1C31166G01 and 1C31169G02 |
| Verification Method | Confirm nameplate, controller config, protocol mapping and cable termination |
| Unverified Claims | Power supply module, DI or DO card, rack backplane, generic PLC CPU |
| Environment | Cabinet mounted, climate controlled, low dust, single point grounding preferred |
| Support Path | Ovation documentation and controller project files, not reseller write-ups |
No confirmed factory datasheet is publicly available for this number alone, so validate against your own Ovation project files before installing.
Quality Control Process
Link cards get comms testing, not just a power up.
- Nameplate and family confirmation. Confirm it is an ELC card and not an LC serial module, since sellers dump both under one heading.
- Connector and pin inspection. Look for bent RJ45 pins, cracked transformer cans and lifted solder from forced removal.
- Continuity and termination check with a Fluke cable tester. Verify the run, the patch panel and any media converter in the path.
- Link negotiation check with a managed switch. Watch for duplex mismatch, which causes slow drops rather than hard failure.
- Ping and packet capture with a laptop and Wireshark. Confirm the card answers and that traffic is not flooding the control network.
- Protocol mapping test. Drive one known point end to end and confirm the value lands on the right tag, not a shifted address.
- ESD bag and dry pack. Store with desiccant, since pulled surplus units often sit in humid warehouses for years.
I once spent a shift blaming a card for lost remote control. The switch port had been moved to a different VLAN during a cabinet rework.
Replacement Pitfall Guide
❗ Assuming it swaps with an LC serial card. LC modules like 1C31166G01 with 1C31169G02 handle serial links, not Ethernet. Different wiring, different config, different failure mode.
❗ Skipping protocol address mapping. Modbus and third party integration failures usually trace to address mismatch and card configuration, not dead hardware. Check the mapping before spending money.
❗ Dropping it straight onto the control network. A misconfigured or looping device can flood the Ovation network and stall operator screens. Use a managed port with storm control and isolate during bring up.
❗ Ignoring duplex and cable quality. Half duplex mismatch creates intermittent timeouts that look like a failing card. Replace old patch cords, do not reuse random cable from the drawer.
❗ Trusting generic catalog blurbs. Plenty of listings call this a generic PLC module with one day delivery and no spec at all. Ask for a nameplate photo and proof it was pulled from a working Ovation cabinet.
Keep these in mind and you’ll cut 90% of rework time.
Compatibility Matrix & Benchmarks
| Original Model | Replacement / Successor Model | Compatibility Level | Migration Notes |
|---|---|---|---|
| WESTINGHOUSE 1X00569H01 | Refurbished same part | Needs Verification | Confirm nameplate, connector condition, config load and end to end point test |
| WESTINGHOUSE 1X00569H01 | 5X00419G01 | Needs Verification | Listed together as ELC hardware, confirm controller version and config support |
| WESTINGHOUSE 1X00569H01 | 5X00419G02 | Needs Verification | Verify firmware, node addressing and cable type before swap |
| WESTINGHOUSE 1X00569H01 | 1C31166G01 with 1C31169G02 LC serial pair | Not Compatible | Serial link path, needs full rewiring and protocol redesign |
| WESTINGHOUSE 1X00569H01 | External protocol gateway to Modbus TCP | Needs Adaptation | Adds a failure point and latency, but isolates the control network |
| WESTINGHOUSE 1X00569H01 | Ovation upgrade with native Ethernet integration | Needs Adaptation | Requires re-engineering, migration testing and operator training |
Benchmark references
- Acceptance criterion: one mapped point reads correctly end to end with no stale value over a 24 hour watch.
- Network target: no broadcast storm on the control VLAN, with link negotiated at full duplex and zero CRC errors on the switch port.
