IS220PAICH2A
IS220PAICH2A
IS220PAICH2A
IS220PAICH2A

GE IS220PPDAH1B | Power Distribution Feedback Pack for Mark VIe – Field Service Notes

  • Model: IS220PPDAH1B
  • Alt. P/N: 336A5026ADP14
  • Product Series: GE Speedtronic Mark VIe / VIeS
  • Hardware Type: Packaged Power Distribution Feedback (PPDA) Module
  • Key Feature: Dedicated BPPC processor, conformal coating, extended temperature range
  • Primary Field Use: Reads voltage, current, fuse, and ground‑fault signals from up to 6 turbine power distribution boards
Get a Quote
In Stock
Manufacturer:

Our extensive catalogue, including , is available now for dispatch to the worldwide. Brand:
The listed price is not final; the actual selling price is negotiable based on current market conditions.

Description

Hard-Numbers: Technical Specifications

  • Protocol Support: IONet 100Mbps, redundant Ethernet
  • Port Count: 2× RJ45 Ethernet, 1× DC‑37 field connector
  • Data Rate: 100 Mbps full‑duplex deterministic
  • Input Channels: 6 power distribution board interface channels
  • Isolation Rating: 2500 VAC RMS field‑to‑backplane
  • Power Requirements: 24 VDC ±10%, 9.0 W max draw
  • Operating Temperature: -40°C to +70°C
  • Processor: 32‑bit RISC (BPPC), 16MB SDRAM, 32MB Flash
  • Hazardous Rating: Class I Div 2, Zone 2, ATEX/IECEx
  • Physical Protection: Conformal coating for corrosive environments
  • Dimensions: 160 × 80 × 32 mm
  • Weight: 0.45 kg
IS220PAICH2A

IS220PAICH2A

The Real-World Problem It Solves

Turbine auxiliary power systems generate unconditioned, noisy signals that cause false fault trips and unreliable status readings. Multiple standalone monitoring modules waste cabinet space and create complex wiring schemes.

Where you’ll typically find it:

  • Gas turbine auxiliary power distribution panels
  • Steam turbine generator excitation power monitoring
  • Offshore turbine power feed and ground‑fault detection

Bottom line: consolidates power feedback signals, blocks electrical noise, and delivers stable diagnostics to the Mark VIe controller.

 

Hardware Architecture & Under-the-Hood Logic

uses a dedicated BPPC processor for independent signal conditioning and diagnostics. Full galvanic isolation separates field power circuits from backplane and network electronics.

  1. Field power signals enter through the DC‑37 connector.
  2. Signals pass through 2500V isolation barriers to eliminate ground loops.
  3. On‑board circuitry conditions voltage, current, fuse, and fault signals.
  4. Local processor validates inputs and runs continuous self‑diagnostics.
  5. Processed data transmits over redundant IONet to the main controller.
  6. Module reports open circuits, overvoltage, and ground faults via front LEDs.
  7. Redundant ports provide failover without controller interruption.

 

Field Service Pitfalls: What Rookies Get Wrong

Software Version MismatchTechs install on ControlST versions below V04.07. The module fails to initialize and shows a solid FAULT light.

  • Field Rule: Upgrade controller software to V04.07 or newer before installing this revision.

Dual‑End Shield GroundingCable shields grounded at both ends create circulating currents that corrupt low‑level power signals. Readings drift or spike randomly.

  • Quick Fix: Terminate shields only at the marshalling cabinet; leave the module end ungrounded.

ESD Exposure Without ProtectionHandling the module without ESD protection damages isolation components. Intermittent power faults appear weeks after installation.

  • Field Rule: Use an ESD wrist strap at all times. Store unused modules in anti‑static bags.
IS220PAICH2A

IS220PAICH2A

Commercial Availability & Pricing Note

Please note: The listed price is for reference only and is not binding. Final pricing and terms are subject to negotiation based on current market conditions and availability.

Related products