IS220PDIOH1B
IS220PDIOH1B
IS220PDIOH1B
IS220PDIOH1B
IS220PDIOH1B

GE IS220PDIAH1B | 24-Ch Discrete Input Pack for Mark VIe – Field Notes

  • Model: IS220PDIAH1B
  • Alt. P/N: 336A5026ADP4 (internal board P/N)
  • Product Series: GE Speedtronic Mark VIe
  • Hardware Type: Packaged Discrete Input (PDIA) I/O Module
  • Key Feature: 24 optically isolated inputs, 2ms adjustable filtering
  • Primary Field Use: Reads dry contacts and 24V DC sensors in turbine safety/control loops
Get a Quote
In Stock
Manufacturer:
Part number: GE IS220PDIAH1B
Our extensive catalogue, including : GE IS220PDIAH1B , is available now for dispatch to the worldwide. Brand:
The listed price is not final; the actual selling price is negotiable based on current market conditions.

Description

Hard-Numbers: Technical Specifications

  • Protocol Support: IONet (Mark VIe proprietary), 100Mbps Ethernet
  • Port Count: 2× RJ45 Ethernet, 1× DC-37 field I/O connector
  • Input Channels: 24 discrete, dry contact/24V DC compatible
  • Input Voltage: 18–32 VDC (nominal 24 VDC)
  • Isolation Rating: 2500 VAC optical (input-to-backplane/channel-to-channel)
  • Input Filter: 2 ms configurable hardware debounce
  • Power Draw: 3.0 W typical; 28.0 VDC nominal input
  • Operating Temperature: -30°C to +65°C
  • Storage Temperature: -40°C to +70°C
  • Dimensions: 226 × 107 × 30 mm (W×H×D)
  • Weight: 0.8 kg
  • Hazardous Rating: Class I Div 2, Zone 2, ATEX / IECEx approved
IS220PDIOH1B

IS220PDIOH1B

The Real-World Problem It Solves

Critical turbine systems face ground loops and EMI-induced false trips from unisolated discrete signals. Unfiltered contact bounce causes unstable logic and unplanned downtime in power generation.

Where you’ll typically find it:

  • Gas turbine ignition and starter permissive interlocks
  • Steam turbine emergency trip (ETS) limit switch monitoring
  • Compressor anti-surge valve position feedback loops

Bottom line: eliminates signal cross-talk and stabilizes discrete inputs in high-noise industrial environments.

 

Hardware Architecture & Under-the-Hood Logic

integrates a 32-bit RISC processor and high-voltage opto-isolation. It operates autonomously for I/O scanning, reducing main controller overhead.

  1. Field signals terminate at the DC-37 connector.
  2. Signals pass through 2500V optical isolation barriers.
  3. On-board filtering suppresses transient noise (2ms fixed).
  4. Local microprocessor scans and validates channel states.
  5. Data transmits over dual redundant Ethernet to the Mark VIe controller.
  6. Per-channel diagnostics detect open circuits and over-voltage conditions.
  7. Front-panel LEDs indicate power, fault, and Ethernet link status.

 

Field Service Pitfalls: What Rookies Get Wrong

Under-Voltage OperationTechnicians often apply 24.0 VDC and report intermittent input dropouts. Minimum reliable voltage is 27.4 VDC under full load.

  • Field Rule: Set supply to 28.0 VDC. Verify at module terminals with all channels active.

Shield Ground LoopsRookies ground field cable shields at both ends. Induced currents create false input triggers.

  • Quick Fix: Terminate shield only at the marshalling cabinet; float the module end.

Hot-Swap DamageReplacing under power causes backplane glitches that lock the I/O node.

  • Field Rule: De-energize the rack or disable node via Toolbox. Wait 30 seconds before swapping.
IS220PDIOH1B

IS220PDIOH1B

Commercial Availability & Pricing Note

Please note: The listed price is for reference only and is not binding. Final pricing and terms are subject to negotiation based on current market conditions and availability.

Related products