Description
Product Core Brief
- Model: FBM201D
- Brand: FOXBORO
- Series: I/A Series DCS
- Core Function: Acquires 8 channels of 0-10V DC analog signals for precise process monitoring.
- Product Type: Analog Input Interface Module
- Key Specs: 8-Channel, 0-10V DC Input, P0922YK
- Condition: New Original (New Surplus)
Key Technical Specifications
| Parameter | Value |
|---|---|
| Module Type | Analog Input Interface Module |
| Channel Count | 8 Isolated Channels |
| Input Signal | 0 to 10 V DC |
| Alternate Part Number | P0922YK |
| System Compatibility | FOXBORO I/A Series DCS |
| Communication | Redundant 2 Mbps Module Fieldbus |
| Operating Temp | -40 to +70 °C |
| Dimensions | 10.4 x 4.5 x 11.4 cm |
FOXBORO FBM201D
Product Introduction
Accurate analog signal acquisition is critical for maintaining tight process control loops in industrial environments. The FOXBORO is an 8-channel analog input interface module designed specifically for the I/A Series DCS. It captures 0-10V DC signals with high-precision Σ-Δ data conversion, ensuring reliable process variable monitoring for the control system.
This module features individual channel isolation and communicates via a redundant 2 Mbps module fieldbus to its associated FCM or FCP. Field deployments confirm that using the exact specification prevents fieldbus communication errors and ensures accurate data integration within the I/A Series architecture.
Key Selling Points & Differentiators
- Exact I/A Series Compatibility: Designed specifically for FOXBORO I/A Series DCS; not recommended for third-party or non-I/A Series backplanes due to proprietary fieldbus protocols.
- High-Precision 0-10V Acquisition: Features Σ-Δ data conversion on all 8 channels, providing accurate analog signal representation without external signal conditioners.
- Redundant Fieldbus Communication: Communicates via a redundant 2 Mbps module fieldbus, ensuring reliable data exchange with controllers even during communication path faults.
- Rigorous Live Bench Testing: Every unit undergoes a 24-hour continuous load test with fieldbus communication verification and full-scale I/O signal simulation before shipping.
- New Surplus Availability: Factory-sealed condition with verified source traceability, bypassing typical OEM lead times for discontinued I/A Series hardware.
- Anti-Counterfeit Verification: Serial numbers are checked against manufacturer databases during incoming inspection to guarantee authenticity.
FOXBORO FBM201D
FAQ
The is designed for the I/A Series platform, but compatibility with specific sub-platforms depends on firmware and backplane revision. Always verify your system’s exact configuration and check the I/A Series hardware compatibility matrix before ordering. Mixing incompatible FBM revisions can cause fieldbus communication failures.
No. The base FBM201 is configured for 0-20 mA DC input, while the is specifically designed for 0-10 V DC input. Substituting a different input range will result in incorrect process readings and potential control loop instability. Always match the exact model number to your application requirements.
Do I need to configure the fieldbus address before installing?
Yes. The typically requires fieldbus address configuration via DIP switches or software configuration in the I/A Series control builder. I always recommend backing up your control strategy, verifying the fieldbus address matches your system design, and running a fieldbus scan after installation to confirm communication.
What happens if I connect a 4-20mA transmitter to this module?
The is strictly rated for 0-10V DC input. Connecting a current loop device directly to the voltage input terminals will result in incorrect readings and may damage the input circuitry. If your field device outputs a 4-20mA signal, you need the base FBM201 module instead.
Is there a warranty on this new surplus unit?
Yes. All new surplus modules come with a standard 12-month functional warranty. If the unit fails during normal operation within that period, we provide a direct replacement. We also include our internal test report with every shipment so you can verify the 24-hour load test and fieldbus communication results before installation.
