Description
Detailed Parameter Table
| Parameter Name | Parameter Value |
| Product Model | ABB PFEA111-65 3BSE028140R0065 |
| Manufacturer | ABB |
| Product Category | Fieldbus Communication Interface |
| Compatible System | AC 800M Controller |
| Communication Protocol | PROFIBUS DP |
| Data Transfer Rate | Up to 12 Mbps |
| Power Supply | 24V DC (±10%) |
| Operating Temperature | 0°C to +60°C |
| Protection Rating | IP20 |
| Dimensions (W×H×D) | 45×130×115 mm |
| Redundancy Support | Yes (with redundant module) |
| Certifications | CE, UL, IEC 61131-2 |
ABB PFEA111-65 3BSE028140R0065
Product Introduction
The ABB PFEA111-65 3BSE028140R0065 is a PROFIBUS DP communication interface designed for ABB’s AC 800M programmable automation controller. This module enables seamless integration of field devices and remote I/O into industrial automation networks, ensuring reliable and high-speed data exchange.
Engineered for real-time control and diagnostics, the PFEA111-65 is widely used in process automation, power generation, and manufacturing applications. Its robust design and PROFIBUS DP compliance make it ideal for demanding industrial environments where deterministic communication is critical.
Core Advantages & Technical Highlights
High-Speed PROFIBUS DP Communication
Supports PROFIBUS DP-V0/V1 at speeds up to 12 Mbps.
Deterministic data exchange for real-time control applications.
Seamless Integration with AC 800M
Direct compatibility with ABB AC 800M controllers.
Supports cyclic and acyclic data transfer for flexible automation.
Robust Industrial Design
Wide operating temperature range (0°C to +60°C).
Compact, DIN-rail mountable for space-efficient installation.
Advanced Diagnostics & Redundancy
Built-in diagnostics for network health monitoring.
Redundancy support for high-availability systems.
Typical Application Scenarios
Process Industries (Oil & Gas, Chemical, Pharma): Connects field instruments (sensors, actuators) to DCS.
Power Plants: Interfaces with turbine control and protection systems.
Manufacturing Automation: Links PLCs with distributed I/O in assembly lines.
Water & Wastewater: Enables remote monitoring of pumping stations.
Mining & Metals: Used in harsh environments for motor control and process automation.
ABB PFEA111-65 3BSE028140R0065
Related Model Recommendations
ABB PFEA112-65 – Redundant PROFIBUS DP interface module.
ABB CI867 – Ethernet/IP communication module for AC 800M.
ABB PM864AK01 – Processor module for AC 800M.
ABB TB811 – Termination board for I/O modules.
ABB S800 I/O – Remote I/O system for distributed automation.
Installation & Maintenance
Installation Guidelines
Mount on DIN rail in a well-ventilated control cabinet.
Use shielded PROFIBUS cables for noise immunity.
Verify termination resistors at bus ends.
Maintenance Best Practices
Monitor PROFIBUS diagnostics for early fault detection.
Check power supply stability (24V DC).
Update firmware via ABB’s Control Builder.
Service & Warranty
3-year warranty covering manufacturing defects.
ABB’s global technical support (24/7 assistance).
Firmware updates & cybersecurity patches available.
