Description
Product Core Brief
- Model: PDP22-FBP (suffix indicates cable length, e.g. .025 / .050 / .100 / .500)
- Brand: ABB
- Series: ABB FBP FieldBusPlug family
- Core Function: PROFIBUS DP-V0/V1 fieldbus adapter that connects ABB FBP-compatible devices to a PROFIBUS DP network.
- Product Type: PROFIBUS DP FieldBusPlug / fieldbus adapter
- Key Specs: PROFIBUS DP-V0/V1 | up to 12 Mbps | 24 VDC | IP65 | M12 PROFIBUS connector | FBP device interface | LED diagnostics | hot-swappable
- Condition: New Original / New Surplus
Key Technical Specifications
- Product designation: PDP22-FBP PROFIBUS DP FieldBusPlug
- Protocol support: PROFIBUS DP-V0 / DP-V1
- Data rate: Up to 12 Mbps
- Supply voltage: 24 VDC
- Protection rating: IP65
- Network connector: A-coded M12 PROFIBUS DP connector
- Device interface: ABB FBP neutral bus interface
- Diagnostics: LED indicators for power, bus status, and communication errors
- Installation: Standalone mounting; not DIN-rail mounted
- Cable length variants: .025 / .050 / .100 / .500 meters
- Typical order code example: PDP22-FBP.100 = 1SAJ240100R1010
- Typical applications: UMC motor controllers, soft starters, distributed I/O, motor protection devices, AC500-based systems
- Origin: Czech Republic (typical)
Product Introduction
The ABB PDP22-FBP is a PROFIBUS DP FieldBusPlug used to connect ABB FBP-compatible field devices to a PROFIBUS DP network. Instead of being a standalone PLC or I/O module, it acts as a protocol adapter between the field device’s neutral FBP interface and the PROFIBUS DP bus.
It is commonly used with ABB UMC universal motor controllers, soft starters, motor protection devices, and distributed I/O. Because the FBP interface is bus-neutral, the same device can be moved between PROFIBUS DP, DeviceNet, Modbus RTU, or other supported networks simply by changing the FieldBusPlug adapter.
The PDP22-FBP supports PROFIBUS DP-V0 and DP-V1, so it can handle both cyclic process data and non-cyclic parameter/diagnostic communication. Its IP65 enclosure and M12 connector make it suitable for motor control centers and harsh industrial environments.
QA & Testing SOP
- Order code verification: Confirm PDP22-FBP and the correct suffix, such as .025, .050, .100, or .500. Check the full order code, for example 1SAJ240100R1010 for PDP22-FBP.100.
- Visual inspection: Check the M12 connector, FBP interface, housing, cable strain relief, and LED window. Look for bent pins, cracked housing, or water ingress.
- ESD-safe handling: Use anti-static packaging and grounded handling. The internal bus interface electronics are sensitive to static discharge.
- 24 VDC supply check: Verify the device receiving the FieldBusPlug is powered with correct 24 VDC. The adapter itself does not replace the device power supply.
- PROFIBUS link check: Confirm M12 connector seating, cable integrity, station address, baud rate, and termination. Use LED status and master diagnostics to verify communication.
Installation Pitfalls & Guide
❗ Confirm the correct cable length suffix. PDP22-FBP is sold with different cable lengths. The suffix matters for mechanical fit and installation layout.
❗ Match the PROFIBUS station address and baud rate. The adapter must match the PLC master configuration. A wrong address or baud rate will prevent communication even if the hardware is correct.
❗ Check termination and topology. PROFIBUS DP segments must be properly terminated, especially at the last device. Missing or duplicated termination can cause intermittent bus faults.
❗ Verify device compatibility. PDP22-FBP is intended for ABB FBP-compatible devices such as UMC controllers, soft starters, and related field devices. It is not a universal PROFIBUS card for all third-party equipment.
❗ Do not confuse it with a PLC or I/O module. The FieldBusPlug provides communication access; control logic, I/O mapping, and diagnostics depend on the host device and PLC master configuration.
Replacement steps:
- Pre-install: Record the existing adapter model, cable length, station address, baud rate, and cable routing.
- Removal: Disconnect the PROFIBUS M12 connector and FBP interface. If the device supports hot swapping, follow the manufacturer procedure; otherwise isolate power first.
- Install: Seat the new PDP22-FBP firmly into the FBP interface and reconnect the PROFIBUS cable.
- Commissioning: Power the device, check LED status, verify master diagnostics, and confirm process data exchange before returning the system to full operation.
Technical FAQ
What does the suffix .100 mean in PDP22-FBP.100?
It indicates the cable length, typically 1 meter. Other common variants include .025, .050, and .500.
Is PDP22-FBP compatible with my ABB motor controller?
If the device has an ABB FBP interface and the system uses PROFIBUS DP, PDP22-FBP is typically the correct adapter. Still verify the device type, firmware, and PLC master configuration.
Can it be used with AC500 or other PLCs?
Yes. PDP22-FBP connects FBP devices to a PROFIBUS DP network, which can be managed by AC500, Siemens S7, or other PROFIBUS DP masters. The PLC side must have the correct GSD file and I/O mapping.
Do you offer price flexibility?
Yes. Pricing depends on cable length variant, quantity, and urgency. New original stock and tested surplus units are quoted separately.
What warranty is included?
Typical coverage is 12 months from delivery for functional defects, excluding damage from incorrect installation, bus configuration errors, or mismatched device compatibility. Final terms are confirmed on the quotation.
