Description
Product Core Brief
- Model: PDF11-FBP.050
- Order Code: 1SAJ924002R0005
- Brand: ABB
- Product Type: FieldBusPlug connection cable / fieldbus accessory
- Core Function: Provides pre-assembled fieldbus connection between ABB devices and the fieldbus segment
- Key Specs: FBP interface | pre-assembled cable | device-specific connector | length/spec indicated by “050”
- Condition: New Original / New Surplus — verify per listing
Key Technical Specifications
| Parameter | Specification |
|---|---|
| Order Code | 1SAJ924002R0005 |
| Product Model | PDF11-FBP.050 |
| Product Family | ABB FieldBusPlug accessories |
| Function | Fieldbus connection cable / plug-in communication cable |
| Interface | FieldBusPlug compatible |
| Cable Length | “050” likely indicates 0.5 m or a specific length code; confirm on nameplate |
| Connector Type | Device-specific FBP connector; varies by target device |
| Typical Applications | ABB low-voltage devices, drive accessories, fieldbus segments, control cabinet wiring |
Note: Protocol type, pinout, cable length, and compatible device list must be confirmed against the ABB datasheet or the original nameplate.
Product Introduction
ABB PDF11-FBP.050 1SAJ924002R0005 is a FieldBusPlug connection accessory used to establish fieldbus communication links in ABB automation and low-voltage product installations. Instead of building custom cables on site, this pre-assembled FBP cable reduces wiring errors, shortens commissioning time, and improves connection reliability inside control cabinets.
For MRO and project buyers, it is mainly useful as a direct replacement when an existing FBP cable is damaged, missing, or incorrectly length-coded. Because “PDF11-FBP.050” follows ABB’s accessory naming pattern, the key confirmation points are the connector type, cable length, and the device it plugs into.
QA & Testing SOP
- Label verification — Confirm ABB branding, order code 1SAJ924002R0005, and model PDF11-FBP.050 on the cable tag or packaging.
- Connector inspection — Check FBP plug pins, housing, strain relief, and locking mechanism for damage or bent contacts.
- Continuity test — Verify pin-to-pin continuity and absence of short circuits with a multimeter.
- Insulation check — Confirm no conductor-to-shield or conductor-to-housing shorts.
- Fit check — Where possible, test mating with the target device or a known-compatible FBP port before dispatch.
Installation Notes
- Do not force the FBP connector; misalignment can bend pins.
- Match the cable length to cabinet routing; too short creates strain, too long adds clutter.
- Keep fieldbus cables away from power cables and VFD output lines to avoid communication faults.
- If replacing an existing cable, photograph the original routing and connector orientation first.
- Confirm protocol compatibility — FBP cables may be used across different ABB device families, but pinout and device support are not universal.
Technical FAQ
Is this a PLC or DCS module?
No. Based on the “FBP” designation, it is a fieldbus plug/connection cable rather than a CPU, I/O module, or controller.
Can I order this without the ABB manual?
You can order it as a replacement if the order code 1SAJ924002R0005 matches your existing part. For new installations, confirm the compatible device list first.
What does “050” mean?
It most likely refers to cable length or a specific configuration code, such as 0.5 m. Confirm on the original cable tag before replacing.
Do you stock single units?
Yes. Single units are available for MRO replacement; project quantities can be quoted on request.
What warranty applies?
Surplus stock typically carries a 30–90 day functional warranty depending on condition grade; new original units follow OEM terms.
