Description
Detailed Parameter Table
| Parameter Name | Parameter Value |
| Product Model | 3BHE039203R0101 |
| Manufacturer | ABB |
| Product Category | Analog Input Module (S800 I/O Series) |
| Input Type | 4-20 mA / 0-20 mA (HART-capable) |
| Channel Count | 8 channels (galvanically isolated) |
| Resolution | 16-bit (0.0015% of span) |
| Accuracy | ±0.05% of reading (True C1 accuracy) |
| Isolation Voltage | 1500 VAC channel-to-system |
| HART Support | Yes (HART 7 compliant) |
| Intrinsic Safety | [Ex ia] IIC / [Ex ia] IIB certification |
| Operating Temperature | -40°C to +85°C |
| Certifications | ATEX, IECEx, SIL 3, cFMus |
| Conformal Coating | 50 μm thickness (corrosion protection) |
ABB 3BHE039203R0101
Product Introduction
The ABB 3BHE039203R0101 (XVC771EX) is an intrinsically safe analog input module engineered for ABB’s S800 I/O High Integrity platform. Designed for explosive environments, this SIL 3-certified device acquires critical process signals in Zone 0/1 hazardous areas without requiring external barriers. As part of ABB’s 800xA Safety Systems, the XVC771EX delivers laboratory-grade measurement accuracy while meeting ATEX/IECEx standards for gas groups IIC (hydrogen) and IIB (ethylene).
Featuring eight galvanically isolated channels, the module converts 4-20mA signals from transmitters, temperature sensors, and analyzers with 16-bit resolution. Integrated HART 7 protocol enables bidirectional communication with smart field devices for predictive maintenance diagnostics. The 3BHE039203R0101 integrates directly with AC 800M High Integrity controllers via the S800 bus, providing deterministic sub-millisecond response times for safety instrumented functions (SIFs) in oil/gas, chemical, and pharmaceutical applications.
Core Advantages and Technical Highlights
Explosive Environment Safety:
Certified for [Ex ia] IIC T4 (Ta = 85°C), eliminating external barriers in Zone 0. Dynamic power limiting prevents ignition-capable energy release under fault conditions.
Uncompromised Precision:
Achieves ±0.05% reading accuracy across -40°C to +85°C range – 3× better than industry standards. Auto-zero calibration compensates for thermal drift without manual intervention.
Advanced Diagnostics:
Continuous monitoring of loop integrity:
Open/short circuit detection
HART command execution verification
SIL 3-compliant watchdog timer
Faults trigger prioritized alarms in Control Builder Safe
Extreme Durability:
50μm conformal coating withstands H₂S concentrations >1000 ppm. Vibration tolerance: 5g @ 10-150 Hz (IEC 60068-2-6). Redundant power inputs (24VDC) ensure continuous operation.
Typical Application Scenarios
The ABB 3BHE039203R0101 secures critical processes in:
Offshore Platforms: SIL 3 pressure monitoring in gas compressor packages (Zone 0)
Refineries: Crude column temperature inputs with HART-enabled diagnostics
Chemical Plants: Chlorine gas detector signal acquisition (IIC T4 environment)
Pharmaceutical: Sterile bioreactor pressure control with 21 CFR Part 11 compliance
Mining: Methane concentration monitoring in coal seam drainage systems
ABB 3BHE039203R0101
Related Model Recommendations
3BHE032285R0102 (XVC772): Standard analog input module (non-hazardous)
3BSE050091R1 (CI871): PROFIBUS controller for XVC771EX integration
TA521V: Intrinsic safety isolator for legacy systems
3BSE018105R1 (SD821): HI-rated redundant power supply
TB811EX: Certified terminal board for Zone 1 wiring
PFB401: Fieldbus barrier for hybrid installations
Installation, Commissioning and Maintenance Instructions
Installation Preparation:
Verify area classification matches [Ex ia] certification. Use shielded twisted-pair cables with screen grounded at IS earthing point only. Maintain 50mm separation from non-IS circuits. Confirm ambient temperature ≤85°C.
Maintenance Protocol:
Annual calibration with ABB Calibration Management Software. Quarterly:
Inspect conformal coating for delamination
Verify HART communication via Field Device Manager
Check terminal torque (0.5 N·m)
Replace modules after 15 years or if “CHANNEL FAULT” LED persists. Always discharge static before handling.
Service and Guarantee Commitment
ABB provides a 36-month SIL 3 performance warranty for the 3BHE039203R0101, including:
Explosion Safety Recertification: 5-year factory recertification service
24/7 Critical Support: TÜV-certified engineers (<30 min response)
Firmware Security: Digitally signed updates via ABB Cyber Security Portal
Lifecycle Guarantee: 20-year spare availability commitment
All modules undergo 1000+ hour explosive atmosphere testing and 200-hour burn-in at 85°C.
