Product Core Brief
- Model: KJ4006X1-BD1
- Brand: Emerson (Emerson Automation Solutions)
- Series: DeltaV M-Series Accessories
- Core Function: DeltaV M-series interface / base card assembly used within M-series carrier and wiring arrangements.
- Product Type: Interface / Base Card (DeltaV M-Series Accessory)
- Key Specs: M-series carrier accessory | interface wiring board | DeltaV DCS spare | factory-sealed surplus available
- Condition: New Original (New Surplus) / Factory Sealed
Product Introduction (Rotation Engine)
The EMERSON is an interface / base card assembly for the Emerson DeltaV M-series I/O system. It is typically referenced as a base card or interface wiring board used within DeltaV M-series carrier and terminal arrangements. This type of component supports field wiring, signal routing, or mechanical/electrical integration between DeltaV I/O modules, terminal blocks, and the carrier backplane.
For procurement and maintenance teams, the KJ4006X1-BD1 is primarily relevant as a spare or replacement accessory for existing DeltaV M-series installations. A factory-sealed surplus unit helps reduce risk from prior field wiring faults, damaged connectors, corrosion, or unknown installation history. Because DeltaV M-series accessories can vary by revision and application, the exact function should be confirmed against the module nameplate, associated 12P part number, and DeltaV documentation before installation.
Key Technical Specifications
| Parameter | Value |
|---|---|
| Manufacturer | Emerson (Emerson Automation Solutions) |
| Product Family | DeltaV M-Series Accessories |
| Module Type | Interface / Base Card Assembly |
| Model | |
| Associated Part Number | To be confirmed from nameplate / DeltaV documentation |
| Compatible Hardware | DeltaV M-series carriers, I/O modules, and related terminal assemblies |
| Typical Applications | DeltaV M-series wiring interface, carrier accessory replacement, system maintenance |
Note: Confirm the exact function, associated 12P part number, revision, channel arrangement, and compatible carrier layout against the nameplate and DeltaV documentation before ordering.
Key Selling Points & Differentiators
- Genuine DeltaV M-series interface / base card assembly.
- Suitable for maintenance spares on existing DeltaV M-series racks.
- Factory-sealed surplus stock reduces risk of prior field damage or connector wear.
- Helps avoid downtime when replacing missing or damaged interface hardware.
- Useful for system integrators managing DeltaV DCS upgrades or spare parts pools.
- Not recommended as a substitute for I/O modules, controllers, carriers, or power supplies without verification.
Quality Transparency SOP (DYNAMIC GENERATION)
For surplus DeltaV interface/base cards, inspection focuses on physical integrity, connector condition, and correct model identification:
- Visual QA: Inspect housing, label, connectors, and mounting points for impact damage, corrosion, or missing hardware.
- Anti-static handling: Seal in ESD-safe packaging with humidity indicators before shipment.
- Nameplate verification: Confirm model KJ4006X1-BD1 and any associated part number match the order.
- Connector inspection: Check backplane contacts, ribbon connectors, or terminal interfaces for bent pins, oxidation, or contamination.
- Fit verification: Where possible, confirm mechanical compatibility with the intended DeltaV M-series carrier and I/O arrangement.
Technical Risk Avoidance (DYNAMIC GENERATION)
❗ Confirm product type. The is an interface / base card assembly, not a standalone controller, I/O module, power supply, or complete carrier.
❗ Verify associated part number. If a 12P part number is provided, confirm it matches the nameplate and DeltaV documentation before installation.
❗ Check revision compatibility. Hardware revisions may affect connector layout, wiring routing, or carrier compatibility.
❗ Match carrier and I/O modules. Interface/base cards must correspond to the correct DeltaV M-series carrier slot and module arrangement.
❗ Validate field wiring. Incorrect wiring or mismatched terminal blocks can cause signal faults, open circuits, or measurement errors.
Buyer’s FAQ
Is this a genuine Emerson part?
Yes. The EMERSON is an original DeltaV M-series interface / base card assembly. We supply factory-sealed surplus stock when available.
What condition is the unit in?
Units are sold as New Original / New Surplus unless otherwise stated. That means unused, factory-sealed inventory rather than field-removed hardware.
Can I use it as a direct replacement?
If your existing DeltaV station uses a KJ4006X1-BD1 interface/base card and the revision, carrier layout, and associated part number match, it should be a like-for-like replacement. Always confirm the nameplate first.
Is this an I/O module or controller?
No. This is an interface / base card assembly used within DeltaV M-series carrier and wiring arrangements.
How fast can you ship?
Stock availability determines lead time. For urgent DCS maintenance needs, request expedited shipping at checkout.
Do you offer a warranty?
Yes. Warranty terms are provided at checkout. For surplus DCS interface hardware, a clear warranty window helps protect against DOA or hidden inventory damage.
