Product Core Brief
- Model: 5X00226G02
- Brand: Emerson
- Series: Ovation DCS I/O
- Core Function: Solid-state relay (SSR) output module for DC digital switching in Emerson Ovation systems.
- Product Type: Solid-State Relay Output Module
- Key Specs: SSR digital outputs | Galvanic isolation | Backplane-powered Ovation I/O module
- Condition: New Original (New Surplus) / Factory Sealed
Product Introduction (Rotation Engine)
A stuck mechanical relay contact can hide behind a green LED until the next startup sequence fails. The EMERSON 5X00226G02 is an Ovation DCS solid-state relay output module designed for reliable DC digital switching without mechanical wear. It is part of the Emerson Ovation I/O family and is typically used where frequent cycling, clean switching, and long service life matter more than the high-voltage AC switching capability of traditional relay cards.
For maintenance teams, this module is a targeted spare for digital output channels that drive solenoids, indicator lamps, interposing relays, or other DC loads. Because it uses solid-state switching, it avoids contact bounce and mechanical fatigue, which can reduce nuisance trips and extend replacement intervals in high-duty applications. Replacing a failed SSR output module with a verified unit helps restore output integrity without re-terminating the entire base assembly.
Key Technical Specifications
| Parameter | Value |
|---|---|
| Product Type | Ovation Solid-State Relay Output Module |
| Brand | Emerson |
| Model | 5X00226G02 |
| DCS Platform | Emerson Ovation |
| Output Type | Solid-state relay (SSR) digital outputs |
| Switching Characteristic | Bounce-free, no moving contacts |
| Isolation | Galvanic isolation between field and backplane |
| Power Supply | Backplane-powered via Ovation I/O rack |
| Mounting | Ovation I/O base / electronics module slot |
| Configuration | Software-configured in Ovation |
| Typical Applications | Solenoids, lamps, interposing relay coils, DC actuators |
| Condition | New Original (New Surplus) / Factory Sealed |
Note: Exact channel count, output voltage/current ratings, load limits, and compatible personality/base assemblies should be confirmed against the official Emerson/Ovation documentation before commissioning.
Key Selling Points & Differentiators
- Direct Ovation SSR output replacement for DC digital switching applications.
- Solid-state design eliminates mechanical contact wear and bounce.
- Galvanic isolation helps protect the backplane and controller from field disturbances.
- Factory-sealed surplus lowers DOA risk compared with pulled used modules.
- Suitable for power generation, water/wastewater, chemical, and oil & gas plants.
- Not recommended for high-voltage AC mechanical relay replacement, analog output, or non-Ovation racks.
Quality Transparency SOP (DYNAMIC GENERATION)
- Visual inspection: Check housing, connector pins, PCB surface, corrosion, and factory seal integrity.
- Part verification: Confirm model number, revision, and SSR output module designation against the packing list.
- Base recognition check: Verify module ID, slot detection, and power status on a compatible Ovation base.
- Output switching test: Command individual channels and verify clean on/off switching with a DC test load.
- Isolation check: Confirm galvanic isolation and absence of backplane leakage before connecting field wiring.
- Final packing: Anti-static bag, moisture barrier, shock-safe boxing, and photo-documented QA.
Technical Risk Avoidance (DYNAMIC GENERATION)
❗ Do not substitute 5X00226G02 for a mechanical relay output module when AC load switching or dry-contact isolation is required. SSR outputs are typically designed for DC loads and may not behave like Form A/Form C relay contacts.
❗ Verify the correct Ovation personality/terminal module before installation. The electronics module must match its designated base assembly and wiring convention.
❗ Check load voltage, current, and polarity before energizing. SSR outputs must stay within their rated load range; inductive loads may require flyback diodes or snubbers.
❗ Confirm the Ovation database defines the module as a digital/SSR output. A mismatched configuration can cause incorrect output behavior or persistent channel faults.
Buyer’s FAQ
Is this a genuine OEM part?
This is an OEM Emerson Ovation module supplied as new surplus / factory sealed. We do not rebrand, reprogram, or relabel third-party equivalents.
Is it new or refurbished?
Listed as New Original (New Surplus) / Factory Sealed unless otherwise stated. Any change in condition will be disclosed before shipment.
Can I use it as a direct replacement?
Yes, for Ovation solid-state relay output applications driving DC loads. Confirm your base assembly, personality module, and output configuration first.
What is the lead time?
In-stock items typically ship within 1–3 business days after payment confirmation. For bulk orders or export documentation, confirm availability before ordering.
What warranty is included?
A 1-year functional warranty covers manufacturing defects and DOA failures. Damage from incorrect wiring, overcurrent loads, misconfiguration, or non-Ovation installation is not covered.
