Product Core Brief
- Model: 323A3376P44
- Brand: GE / GE Vernova (VERIFY)
- Series: Speedtronic turbine control — legacy generation (VERIFY)
- Core Function: Turbine control system module — VERIFY whether I/O pack, interface card, or controller
- Product Type: Industrial control spare / legacy automation part
- Condition: New Original / New Surplus
Key Technical Specifications
| Category | Parameter | Value |
|---|---|---|
| Identification | Part Number | 323A3376P44 |
| Identification | Brand | VERIFY — confirm from nameplate |
| Identification | Revision / Suffix | VERIFY — P44 may be a revision or configuration code |
| Function | Module Type | VERIFY — I/O pack / interface / controller |
| Platform | System | VERIFY — Mark VI / Mark VIe / other |
| Interfaces | Comms | VERIFY |
| Electrical | Supply | VERIFY |
| Environmental | Operating Temperature | VERIFY |
| Software | Configuration | VERIFY — GE ToolboxST or legacy tool |
| Supply | Availability Status | Legacy / obsolete stock |
Product Introduction (No Fluff)
GE 323A3376P44 is a legacy Speedtronic-era turbine control part. The numbering pattern places it in the GE gas/steam turbine control family, but the module type — I/O pack, interface card, or controller — cannot be confirmed from public listings, so this page ships with the specification fields open rather than guessing.
Two details decide whether a replacement works. First, the module type: a wrong card type will not seat or address in the rack. Second, the suffix: on GE control parts the trailing characters encode revision and configuration, and P44 must match the removed unit exactly. Bottom line: send the nameplate photo and we will fill in every field from the physical unit.
QA & Testing SOP
- Anti-counterfeit intake. Nameplate photographed under raking light; part number, revision, and lot code checked for consistent laser depth.
- Connector and board inspection. Edge connector and pins checked for bending, oxidation, and heat discoloration.
- Rack power-up. Installed in a known-good test rack; startup sequence and LED states compared against the GE manual.
- Function verification. Module addressed and each channel exercised against a calibrated reference; diagnostics confirmed to trigger.
- ESD-safe, moisture-protected packing. Anti-static bag, foam cradle, humidity indicator, sealed and photographed before dispatch.
Installation Pitfalls & Guide
❗ Unconfirmed module type. Do not order on part number alone — confirm the card type against the removed unit.
❗ Suffix verification. P44 may denote revision or configuration. Confirm the full string before purchase.
❗ Configuration is not stored on the module. A replacement boots with defaults; restore the application before energizing.
❗ Redundancy state. On a redundant or TMR system, identify the active leg before removal to avoid an unplanned switchover.
Replacement sequence:
- Pre-install — photograph slot position, wiring, LED states; export the configuration.
- Removal — follow the documented procedure; label every cable.
- Install — seat fully, restore grounding, torque to spec.
- Commissioning — cold boot, load configuration, validate channels, confirm healthy status, return to service.
Technical FAQ
Is pricing negotiable on volume? On legacy GE stock, price follows availability rather than quantity. Tell us your real requirement up front.
What warranty applies? Twelve months on New Original. Six months on New Surplus.
What exactly is 323A3376P44? A GE legacy turbine control part. Public listings are too thin to confirm the module type — we verify from the nameplate rather than guess.
Will a similar-numbered card swap in? No. On GE control parts, suffix codes change function and compatibility. Confirm the complete part number.
Why not upgrade to a current platform? Because a newer platform changes I/O architecture, network topology, and commissioning — that’s an engineering project, not a purchase order.
Next step: send a nameplate photo (or the equipment manual reference) and I’ll confirm the module type and replace every VERIFY field with real data. I can also add FAQPage + Product Schema markup on request.
