Product Core Brief
- Model: ABB XVC772A102 (3BHE032285R0102)
- Brand: ABB
- Series: AC800PEC power electronics control platform
- Core Function: High-speed controller board for AC800PEC-based drive, converter, and power electronics systems, handling fast control, fiber-optic communication, and system-level I/O coordination.
- Product Type: AC800PEC controller / interface board
- Key Specs: XVC772A102 model | 3BHE032285R0102 order number | AC800PEC backplane-mounted | fiber-optic high-speed links | revision-dependent configuration
- Condition: New Original / New Surplus
Product Introduction
ABB XVC772A102 3BHE032285R0102 is a controller board used in ABB AC800PEC-based power electronics systems. It is typically installed in medium- and high-power drive, converter, excitation, or grid-interactive cabinets, where it supports high-speed control, fiber-optic communication, and coordination with companion AC800PEC modules.
Its value is in lifecycle support for installed AC800PEC cabinets. Some third-party listings describe XVC772 boards as generic digital/analog I/O modules with Profibus or Modbus interfaces, 4-20 mA / 0-10 V channels, or standalone PLC functions. Those descriptions are not confirmed by authoritative ABB documentation for 3BHE032285R0102 and may refer to other products entirely. Treat all specific channel counts, protocol claims, and voltage ratings as unverified until the host cabinet documentation is checked.
Key Technical Specifications
| Parameter | Value |
|---|---|
| Manufacturer | ABB |
| Model / Order No. | XVC772A102 / 3BHE032285R0102 |
| Device Type | AC800PEC controller / interface board |
| Platform | AC800PEC power electronics / drive control system |
| Mechanical Form | AC800PEC plug-in board, rack-mounted |
| Communication | Fiber-optic high-speed links; service/engineering Ethernet (system-dependent) |
| Typical Application | MV drives, converters, excitation systems, AFE rectifiers, FACTS equipment |
| Condition | New Original / New Surplus |
Quality Control Process (DYNAMIC GENERATION)
- Visual inspection: Check PCB surface, fiber-optic ports, connectors, ejector handles, and backplane pins for damage, contamination, or bent contacts.
- Nameplate verification: Confirm both XVC772A102 and 3BHE032285R0102 are present and legible; do not substitute with XVC772A101 or 3BHE032285R0101 without engineering approval.
- Connector and fiber-optic port check: Verify optical connectors and electrical contacts are clean, aligned, and undamaged.
- Power-up test in matched AC800PEC rack: Confirm backplane power, LED indicators, firmware recognition, and basic diagnostics through the host system.
- Anti-static and optical protection: Seal in ESD packaging; cap fiber-optic ports; protect connectors during transit.
Replacement Pitfall Guide (DYNAMIC GENERATION)
❗ Match the full order number and revision. XVC772A102 / 3BHE032285R0102 is not automatically interchangeable with XVC772A101 / 3BHE032285R0101 or other XVC772 variants. Revision differences can affect firmware, pinout, or application mapping.
❗ Do not treat it as a generic I/O or PLC module. Claims about 4-20 mA, 0-10 V, 16DI/16DO, Profibus, or Modbus come from non-authoritative reseller pages and are not confirmed for this AC800PEC board.
❗ Confirm the host AC800PEC cabinet. This board belongs to the AC800PEC power electronics platform. Installing it in a non-AC800PEC cabinet risks mechanical, electrical, and firmware incompatibility.
❗ Verify firmware and slot assignment. Even with the correct model number, mismatched firmware, slot position, or application configuration can prevent commissioning.
Keep these in mind and you’ll cut 90% of rework time.
Compatibility Matrix & Benchmarks
| Original Model | Replacement / Successor Model | Compatibility Level | Migration Notes |
|---|---|---|---|
| ABB XVC772A102 3BHE032285R0102 | Same order number + matching revision | Direct | Confirm host AC800PEC cabinet, firmware, and slot assignment. |
| ABB XVC772A101 3BHE032285R0101 | XVC772A102 3BHE032285R0102 | Needs Adaptation | Different revision; requires engineering and firmware verification. |
| ABB XVC772A102 3BHE032285R0102 | Other AC800PEC boards | Not Interchangeable | Different board role; requires slot, wiring, and application verification. |
| ABB XVC772A102 3BHE032285R0102 | Generic PLC/DCS I/O modules | Not Interchangeable | Different platform, mechanical interface, and system architecture. |
Benchmark notes: No authoritative ABB datasheet has been found to confirm detailed electrical ratings, response time, isolation voltage, or environmental specifications for XVC772A102 3BHE032285R0102. Third-party claims about analog/digital channel counts, Modbus/Profibus support, or standalone PLC functions should not be relied upon without host cabinet verification.
To confirm compatibility, please share the host AC800PEC cabinet model or a nameplate photo of the original board.
