Product Core Brief
- Model: DS200PCCAG5ACB
- Brand: GE (General Electric / GE Speedtronic family)
- Series: Mark V DS200
- Core Function: PCCA power connection card that interfaces the SCR power bridge with the drive control circuit in GE Mark V drive systems.
- Product Type: Power Connection Card (PCCA)
- Key Specs: G5 group | no onboard snubber / no attenuation string | uses DCFB power board | for J, K, and M frames | 4 configurable jumpers (JP1, JP2, WP3, WP4) | supports separate or common bus transformer configuration
- Condition: New Surplus / Refurbished (legacy/discontinued board; confirm revision, jumper settings, and compatible drive frame)
Product Introduction
The GE DS200PCCAG5ACB is a PCCA Power Connection Card from the GE Speedtronic Mark V DS200 series. It serves as the interface between the SCR power bridge and the drive control circuit, routing gate-drive signals and returning scaled voltage/current feedback to the control card.
This board belongs to the G5 PCCA group. G5-group PCCA boards are designed for J, K, and M frame drive cabinets and use the DCFB power board for frame power. Unlike some lower-horsepower PCCA boards, the G5 version does not include an onboard snubber or attenuation string; snubber functions may be located elsewhere in higher-horsepower systems.
The board uses four configurable jumpers — JP1, JP2, WP3, and WP4 — to select system voltage and determine snubber capacitor connection points. It can operate with either a separate or common bus transformer configuration.
The DS200PCCAG5ACB is typically installed inside GE Mark V drive cabinets such as DC2000-class systems. Because it is a discontinued Mark V component, replacement should follow the drive cabinet documentation, verified jumper configuration, and compatible PCCA group assignment.
Key Technical Specifications
| Parameter | Value |
|---|---|
| Product Type | Power Connection Card (PCCA) |
| Brand | GE (Speedtronic Mark V) |
| Model | |
| Series | Mark V DS200 |
| Typical Application | SCR power bridge interface in Mark V drive systems |
| PCCA Group | G5 |
| Snubber | No onboard snubber / no attenuation string |
| Power Board | Uses DCFB power board |
| Compatible Frames | J, K, M frames |
| Jumpers | JP1, JP2, WP3, WP4 |
| Transformer Config | Separate or common bus transformer |
| Reference Manual | GEI-100161 |
Exact cabinet slot, connector pinout, voltage scaling range, and compatible drive frame must be confirmed from the board label and OEM manual.
Quality Control Process (DYNAMIC GENERATION)
- Part-number verification: Confirm DS200PCCAG5ACB, G5 group, and ACB revision on the board label.
- Visual inspection: Check connectors, jumpers, PCB traces, and pulse transformer area for corrosion, burns, or mechanical damage.
- Jumper configuration review: Verify JP1, JP2, WP3, and WP4 match the original board or drive cabinet documentation.
- Frame compatibility check: Confirm the board matches the installed J, K, or M frame drive cabinet.
- Connector integrity check: Inspect power and signal connectors for bent pins, oxidation, or poor contact.
- DCFB board compatibility check: Confirm the associated DCFB power board is present and correctly configured for the frame.
Replacement Pitfall Guide (DYNAMIC GENERATION)
❗ Confirm G5 group compatibility. DS200PCCAG5ACB is a G5 PCCA board for J/K/M frames; it is not interchangeable with G1, G2, G8, or G10 PCCA boards without engineering verification.
❗ Copy jumper settings before removal. JP1, JP2, WP3, and WP4 determine system voltage and snubber capacitor connection; incorrect settings can cause drive faults.
❗ Verify frame type. The G5 group is designed for J, K, and M frames; installing in an incompatible frame can cause control or feedback errors.
❗ Do not confuse PCCA with DCFB or LDCC boards. PCCA interfaces the SCR bridge; DCFB provides control-level power; LDCC handles drive control and LAN communication.
❗ Confirm snubber configuration. The G5 board has no onboard snubber; snubber functions may be located elsewhere in the system.
❗ Treat as legacy hardware. Mark V components are discontinued; long-term sites should evaluate migration to Mark VI/Mark VIe or GE Vernova equivalents.
Compatibility Matrix & Benchmarks
| Original Model | Replacement / Successor Model | Compatibility Level | Migration Notes |
|---|---|---|---|
| GE | Same board | Direct | Match revision, G5 group, jumpers, and frame type. |
| GE | Other G5 PCCA variants | Needs Verification | Confirm jumper map, frame compatibility, and transformer configuration. |
| GE | Other PCCA groups (G1/G2/G8/G10) | Not Directly Compatible | Different frame, snubber, and regeneration configuration. |
| GE | GE Mark VI / Mark VIe drive controllers | Migration | Newer platform; requires full engineering review. |
Benchmarks:
- Power Connection Card (PCCA) for GE Speedtronic Mark V drive systems.
- Interfaces the SCR power bridge with the drive control circuit.
- G5-group board for J, K, and M frames with no onboard snubber.
- Uses DCFB power board and supports separate or common bus transformer configuration.
- Uses JP1, JP2, WP3, and WP4 jumpers for voltage selection and snubber capacitor configuration.
- Legacy/discontinued board; confirm exact revision and drive cabinet configuration before procurement.
