Product Core Brief
- Model: DS200LDCCH1ANA
- Brand: GE (General Electric / GE Speedtronic family)
- Series: Mark V DS200
- Core Function: Drive control and LAN communication board that provides motor, device, and I/O control for GE DC2000-class drive and exciter cabinets.
- Product Type: Drive Control / LAN Communication Board (LDCC)
- Key Specs: LDCC board family | 4 onboard microprocessors (LCP, DCP, MCP, CMP) | LAN interface for drive communication | analog/digital I/O processing | encoder/timer peripheral support | onboard alphanumeric keypad for diagnostics
- Condition: New Surplus / Refurbished (legacy/discontinued board; confirm revision, firmware, and compatible drive cabinet)
Product Introduction
The GE DS200LDCCH1ANA is a Drive Control / LAN Communication board from the GE Speedtronic Mark V DS200 series. It is commonly used in GE DC2000-class drive and exciter cabinets to manage drive control, motor control, peripheral I/O, and LAN communication within the drive system.
The board integrates multiple onboard microprocessors. The LAN Control Processor (LCP) handles LAN system signals, while the Drive Control Processor (DCP) processes analog and digital I/O conversion and peripheral devices such as encoders and timers. The Motor Control Processor (MCP) and Common Motor Processor (CMP) work together to handle digital I/O communication and additional processing load when required.
This board typically provides a local alphanumeric keypad for system programming and diagnostics. Because it is a discontinued Mark V component, replacement should follow the drive cabinet documentation, verified revision control, and compatible firmware configuration.
Key Technical Specifications
| Parameter | Value |
|---|---|
| Product Type | Drive Control / LAN Communication Board |
| Brand | GE (Speedtronic Mark V) |
| Model | |
| Series | Mark V DS200 |
| Typical Application | DC2000-class drive and exciter control |
| Processors | LCP, DCP, MCP, CMP (4 microprocessors) |
| Communication | LAN interface for drive system communication |
| I/O Handling | Analog/digital I/O, encoder, timer, motor/device control |
| Local Interface | Onboard alphanumeric keypad for diagnostics |
| Status | Legacy / Discontinued |
Exact firmware version, LAN protocol details, I/O channel count, and compatible cabinet slot must be confirmed from the board label and OEM manual.
Quality Control Process (DYNAMIC GENERATION)
- Part-number verification: Confirm DS200LDCCH1ANA and revision on the board label.
- Visual inspection: Check connectors, keypad interface, LEDs, and PCB traces for corrosion, burns, or mechanical damage.
- Connector integrity check: Inspect backplane and I/O connectors for bent pins, oxidation, or poor contact.
- Firmware/revision review: Verify the board revision and firmware compatibility with the installed DC2000 drive cabinet.
- LAN communication check: Confirm the LAN interface initializes correctly and communicates with the host system.
- I/O processor check: Verify DCP, MCP, and CMP functions respond as expected during diagnostics.
Replacement Pitfall Guide (DYNAMIC GENERATION)
❗ Do not confuse it with turbine I/O boards. DS200LDCCH1ANA is a drive control/LAN communication board for DC2000-class drives, not a Mark V turbine TCQA/RST analog I/O board.
❗ Verify the drive cabinet type. The board must match the installed DC2000 or compatible Mark V drive/exciter cabinet.
❗ Confirm revision and firmware. The ANA suffix must match the existing cabinet configuration; mismatched firmware can cause communication or control faults.
❗ Check LAN address settings. Incorrect LAN addressing can prevent the board from communicating with the host controller.
❗ Inspect the keypad and diagnostic interface. A damaged keypad or connector can limit local diagnostics capability.
❗ Treat as legacy hardware. Mark V components are discontinued; long-term sites should evaluate migration to Mark VI/Mark VIe or GE Vernova equivalents.
Compatibility Matrix & Benchmarks
| Original Model | Replacement / Successor Model | Compatibility Level | Migration Notes |
|---|---|---|---|
| GE | Same board | Direct | Match revision, firmware, and drive cabinet slot. |
| GE | DS200LDCCH1 variants (AGA/AMA/ALA/AKA) | Needs Verification | Confirm revision, firmware, connector pinout, and LAN configuration. |
| GE | GE Mark VI / Mark VIe drive controllers | Migration | Newer platform; requires full engineering review. |
| GE | GE Vernova drive/excitation upgrades | Migration | Evaluate LAN architecture, I/O mapping, and cabinet compatibility. |
Benchmarks:
- Drive control and LAN communication board for GE Mark V DC2000-class drives.
- Integrates LCP, DCP, MCP, and CMP processors for drive, motor, and I/O control.
- Handles LAN communication, analog/digital I/O, encoder, and timer interfaces.
- Provides onboard alphanumeric keypad for local diagnostics and programming.
- Legacy/discontinued board; confirm exact revision and drive cabinet configuration before procurement.
