Product Core Brief
- Part Number: DS200FSAAG1ABA
- Brand: GE (GE Energy / GE Digital / GE Industrial Systems)
- Series: GE Speedtronic Mark V / DS200
- Core Function: FSAA (Field Supply Amplifier) board for GE DC2000 DC drives, providing field power amplification for non-reversible plug-in field supply applications.
- Product Type: Mark V DC2000 Field Supply Amplifier Board
- Key Specs: 5 jumpers | 1× 10-pin connector | 2 fuses | multiple test points | non-reversible field supply | legacy/obsolete product
- Condition: New Original / New Surplus
Product Introduction
GE DS200FSAAG1ABA is a Field Supply Amplifier (FSAA) board for GE Speedtronic Mark V DC2000 DC drive systems. It is used as a single-phase field power amplifier board that delivers controlled field supply power within non-reversible plug-in field supply configurations.
The FSAA board provides field power amplification for DC drive applications. It is equipped with 5 jumpers, one 10-pin connector, and 2 fuses, along with multiple test points for service and verification. The board is mounted to a bracket using screws through alignment holes at each corner, and the metal surface around the mounting holes helps protect the board during installation.
The DS200FSAAG1ABA belongs to the FSAA G1 family. Within GE’s DC2000 field supply architecture, the G1 group is associated with non-reversible plug-in field supply applications and can operate in NRX settings alongside the G2 family. Because suffix differences such as “ABA” may affect revision or configuration, the jumper map, fuse rating, and connector assignment should be verified from the physical board label before installation.
Key Technical Specifications
| Parameter | Value |
|---|---|
| Manufacturer | GE (GE Energy / GE Digital / GE Industrial Systems) |
| Part Number | |
| Product Type | Field Supply Amplifier (FSAA) Board |
| Series | GE Speedtronic Mark V / DS200 |
| Typical Application | DC2000 DC drive field power amplification |
| Drive Type | Non-reversible plug-in field supply |
| Jumpers | 5 jumpers |
| Connectors | 1× 10-pin connector |
| Fuses | 2 fuses (rating to be confirmed from board label) |
| Test Points | Multiple integrated test points |
| Status | Legacy / Obsolete |
Note: Public documentation confirms the FSAA function, DC2000 application, non-reversible field supply role, 5 jumpers, 10-pin connector, 2 fuses, and test points, but the exact fuse rating, jumper map, and NRX configuration should be confirmed from the physical board label and GE DC2000 system documentation.
Quality Control Process (DYNAMIC GENERATION)
- Visual and label inspection. We check the part number, revision suffix, PCB surface, connectors, jumpers, fuses, test points, and mounting holes for damage or corrosion.
- Jumper configuration verification. The 5 jumpers are recorded and matched against the original board or system documentation.
- Connector and continuity check. The 10-pin connector and test points are verified for correct pin continuity and no short circuits.
- Fuse and hardware check. The 2 fuses and corner mounting hardware are inspected for proper presence and condition.
- Final packaging. After passing inspection, the board is anti-static bagged and foam-packed for shipment.
Replacement Pitfall Guide (DYNAMIC GENERATION)
❗ Match the field supply type. DS200FSAAG1ABA is intended for non-reversible plug-in field supply applications; do not substitute it into reversible or incompatible field supply configurations without verification.
❗ Copy jumper settings from the original board. The 5 jumpers must match the original configuration to maintain correct field supply behavior.
❗ Label cables before removal. Record which cables connect to the 10-pin connector and any auxiliary connectors to avoid miswiring.
❗ Verify fuse ratings. The board has 2 fuses; their current rating should be confirmed from the board label or GE DC2000 documentation.
❗ Do not confuse G1 with G2 variants. DS200FSAAG1 and DS200FSAAG2 families are both non-reversible, but they may differ in connector layout or application.
❗ Use test points for verification. Voltage and field supply levels should be checked at the integrated test points during commissioning.
❗ Handle as ESD-sensitive equipment. Always use anti-static wrist straps and handling procedures during removal, installation, and storage.
Keep these in mind and you’ll cut 90% of rework time.
Compatibility Matrix & Benchmarks
| Original Model | Replacement / Successor Model | Compatibility Level | Migration Notes |
|---|---|---|---|
| GE | GE | Direct | Same part number; verify jumpers, fuses, and revision. |
| GE | GE DS200FSAAG1A | Needs Adaptation | Same FSAA G1 family; suffix difference may affect revision or configuration. |
| GE | GE DS200FSAAG2ABA | Needs Adaptation | Different FSAA variant; connector layout and field supply assignment may differ. |
| GE | Mark VIe / IS200 drive modules | Not Compatible | Different platform and architecture; not a direct replacement. |
Benchmark highlights
- GE Speedtronic Mark V DC2000 Field Supply Amplifier (FSAA) board.
- Provides single-phase field power amplification for non-reversible plug-in field supply applications.
- Equipped with 5 jumpers, 1× 10-pin connector, and 2 fuses.
- Includes multiple test points for service and voltage verification.
- Part of the FSAA G1 family used in DC2000 drive systems.
- Legacy product; best suited for existing DC2000 system maintenance and like-for-like replacement.
