Product Core Brief
- Model: VE3007
- Part Numbers: KJ2005X1-BA1 / 12P4375X012
- Brand: EMERSON / DeltaV
- Series: DeltaV MX Controller
- Core Function: High-capacity DeltaV controller for batch processing, advanced control, and large single-unit applications.
- Product Type: DeltaV MX Controller Module
- Key Specs: DeltaV fieldbus | 24 VDC | 25 W | -40 to 70°C | dual Ethernet control network | redundancy-ready
- Condition: New Original (New Surplus) / Factory Sealed
Product Introduction (Rotation Engine)
The EMERSON DeltaV VE3007 KJ2005X1-BA1 12P4375X012 is a DeltaV MX controller module used in Emerson’s DeltaV distributed control system. The MX controller family is positioned above MD Plus and MQ controllers, providing higher CPU and memory capacity so that large unit applications can often be consolidated into a single controller node.
The supports batch processing options and advanced control functions, including model predictive control and neural-network-based advanced control where licensed. It communicates over the DeltaV control network and integrates with DeltaV I/O subsystems, including CHARMs-based Electronic Marshalling, FOUNDATION Fieldbus, Profibus DP, and conventional AI/AO/DI/DO cards.
The is the Emerson part number associated with this controller module, and 12P4375X012 is the corresponding assembly/ordering number. The module is typically powered from the DeltaV carrier/backplane at 24 VDC nominal, with a power consumption around 25 W. It supports redundant configuration for high-availability applications and is commonly used in oil & gas, chemical, power, pharmaceutical, and other process industries.
For procurement and maintenance teams, factory-sealed surplus VE3007 units help reduce risk from prior field installation, firmware changes, or unknown operational history.
Key Technical Specifications
| Parameter | Value |
|---|---|
| Manufacturer | EMERSON / DeltaV |
| Model | |
| Part Numbers | KJ2005X1-BA1 / 12P4375X012 |
| Controller Family | DeltaV MX Controller |
| Power Supply | 24 VDC nominal, via DeltaV carrier/backplane |
| Power Consumption | Approx. 25 W |
| Communication | DeltaV fieldbus; dual 10/100Base-TX Ethernet for control network |
| I/O Integration | Via DeltaV I/O subsystems; no direct field I/O on the controller itself |
| Redundancy | Supports redundant pair configuration |
| Operating Temperature | -40 to 70°C (verify per nameplate) |
| Storage Temperature | -40 to 85°C |
| Humidity | 5% to 95%, non-condensing |
| Dimensions | Approx. 230 × 130 × 67 mm (reference listing data) |
| Weight | Approx. 2.5 kg (reference listing data) |
| Country of Origin | United States (per supplier listings) |
Note: Exact memory size, DST limit, scan rates, and firmware capability should be confirmed from the nameplate and Emerson documentation, as MX controller specifications vary by hardware revision and system version.
Key Selling Points & Differentiators
- Genuine DeltaV MX controller for high-capacity process control applications.
- Suitable for batch processing, advanced control, and large single-unit configurations.
- Compatible with DeltaV CHARMs, FOUNDATION Fieldbus, Profibus DP, and conventional I/O.
- Redundancy-ready for high-availability process control systems.
- Dual Ethernet ports for deterministic DeltaV control network communication.
- Factory-sealed surplus stock reduces risk from prior field installation or firmware changes.
- Cross-referenced under and 12P4375X012 for easier procurement verification.
Quality Transparency SOP (DYNAMIC GENERATION)
For surplus DeltaV MX controller modules, inspection focuses on physical integrity, label verification, and packaging condition:
- Visual QA: Inspect module housing, Ethernet ports, carrier connectors, label, and mounting hardware for impact damage, cracking, or corrosion.
- Anti-static handling: Seal in ESD-safe packaging with humidity indicators before shipment.
- Nameplate verification: Confirm model , part number , and assembly number 12P4375X012 match the order.
- Connector inspection: Check dual Ethernet ports, backplane connectors, and status LEDs for wear, oxidation, or bent pins.
- Packaging verification: Ensure factory-sealed packaging is intact with no signs of prior field installation.
Technical Risk Avoidance (DYNAMIC GENERATION)
❗ Confirm controller family. The is a DeltaV MX controller, not an SX, SQ, MD Plus, or MQ controller. MX controllers have different capacity and licensing requirements.
❗ Verify firmware and system compatibility. MX controllers must match the DeltaV system version, licensing, and carrier hardware. Confirm compatibility before ordering.
❗ Check redundancy requirements. If replacing a redundant pair, confirm whether the site requires primary/standby matching, firmware alignment, and redundancy licensing.
❗ Validate power and carrier compatibility. The module is typically powered from the DeltaV carrier at 24 VDC. Ensure the existing carrier and power system support MX-class controllers.
❗ Do not assume I/O is onboard. The VE3007 integrates field devices through DeltaV I/O subsystems; it does not provide direct field wiring terminals on the controller itself.
❗ Confirm part numbers. and 12P4375X012 should both be verified against the nameplate to avoid substitution errors.
Buyer’s FAQ
Is this a genuine Emerson DeltaV controller?
Yes. The 12P4375X012 is an original Emerson DeltaV MX controller module.
What condition is the unit in?
Units are sold as New Original / New Surplus unless otherwise stated. That means unused, factory-sealed inventory rather than field-removed hardware.
Can I use it as a direct replacement?
If your existing installation uses a VE3007 MX controller and the firmware version, carrier type, redundancy configuration, and DeltaV system version match, it should be a like-for-like replacement. Always confirm the nameplate first.
What is the difference between MX, MQ, and SX controllers?
MX controllers provide higher CPU/memory capacity and support batch and advanced control options. MQ is a mid-range DeltaV controller. SX belongs to the smaller-capacity S-series family. They are not directly interchangeable without system verification.
What does KJ2005X1-BA1 mean?
is the Emerson part number associated with this controller module. 12P4375X012 is the corresponding assembly or ordering number.
Does it support redundancy?
Yes. DeltaV MX controllers can be configured in redundant pairs for high-availability applications, subject to licensing and system configuration.
How fast can you ship?
Stock availability determines lead time. For urgent DCS maintenance, request expedited shipping at checkout.
Do you offer a warranty?
Yes. Warranty terms are provided at checkout. For surplus controller hardware, a clear warranty window helps protect against DOA or hidden inventory damage.
