Product Core Brief
- Model: PFTL201C-10.0
- Order Number: 3BSE007913R0010
- Brand: ABB
- Series: Pressductor PillowBlock horizontal tension load cell
- Core Function: Measures horizontal web tension for closed-loop tension control in paper, film, foil, and metal strip processing lines.
- Product Type: Magnetoelastic pillow block load cell
- Key Specs: 10.0 kN rated load | horizontal force measurement | 0.5% FS accuracy | 1000% overload capacity | IP67
- Condition: New Surplus / New Original (subject to available stock)
Product Introduction
The ABB PFTL201C 3BSE007913R0010 is a Pressductor PillowBlock horizontal tension load cell rated at 10.0 kN. It is designed for web processing applications where higher tension levels must be measured with high repeatability and minimal mechanical deflection.
Instead of strain gauges, this unit uses ABB’s magnetoelastic measurement principle. The internal alloy steel block changes its magnetic properties under mechanical stress, producing a signal proportional to the applied horizontal force. This design delivers strong overload resistance, long service life, and stable performance in paper machines, film lines, metal processing, and wire/cable equipment. The PFTL201C version is rated IP67 and is suitable for harsh industrial environments with water spray or dust.
Key Technical Specifications
| Parameter | Value |
|---|---|
| Model | -10.0 |
| Order Number | 3BSE007913R0010 |
| Product Type | Pressductor PillowBlock horizontal tension load cell |
| Rated Load | 10.0 kN (≈10000 N, ≈2250 lbf) |
| Measurement Direction | Horizontal lateral force |
| Accuracy Class | ±0.5% FS |
| Repeatability | < ±0.05% FS |
| Overload Capacity (Measurement Direction) | 100.0 kN (1000% of nominal load) |
| Permitted Transverse Load | 100.0 kN |
| Deflection at Rated Load | ~0.01 mm |
| Spring Constant | 1000 kN/mm |
| Operating Temperature | -20 °C to +85 °C (verify per manual) |
| Protection Rating | IP67 (dust and water resistant) |
| Body Material | Stainless steel (similar to AISI 304) |
| Typical Connection | Cannon connector / shielded cable |
| Typical Applications | Paper, film, foil, metal strip, wire/cable tension control |
Note: Exact wiring, amplifier pairing, and signal scaling must be confirmed from the OEM manual and site configuration. IP rating and temperature range vary by PFTL201C / PFTL201CE variant.
Quality Control Process
- Verify PFTL201C 3BSE007913R0010 on the nameplate and confirm the 10.0 kN rating.
- Inspect the pillow block measuring surfaces, housing, Cannon connector, and cable for mechanical damage or corrosion.
- Check coil resistance and insulation with a multimeter to confirm no open circuits or shorted windings.
- Apply controlled horizontal force and verify linear signal response with a compatible PFEA/PFCA/MC400 amplifier or signal conditioner.
- Confirm zero stability, repeatability, and anti-static packaging before dispatch.
Replacement Pitfall Guide
- Do not install it as a vertical weighing sensor. The PFTL201C measures horizontal force only; vertical load will not produce a correct tension signal.
- Confirm the 10.0 kN range. Replacing it with a 20.0 kN or 50.0 kN unit without recalibration will shift the measurement scale and degrade control accuracy.
- Check the environment rating. The PFTL201C is IP67. If the site requires a fixed-cable version, the PFTL201CE variant may be needed instead.
- Verify amplifier compatibility. This load cell typically requires a PFEA/PFCA/MC400 control unit for excitation and signal conversion; direct PLC analog input connection is not always valid.
Keep these in mind and you’ll cut 90% of rework time.
Compatibility Matrix & Benchmarks
| Original Model | Replacement / Successor Model | Compatibility Level | Migration Notes |
|---|---|---|---|
| ABB -10.0 3BSE007913R0010 | ABB -10.0 3BSE007913R0010 | Direct | Match order number, range, and connector type. |
| ABB -10.0 3BSE007913R0010 | ABB PFTL201CE-10.0 | Needs Adaptation | Fixed-cable version; verify IP rating and cable length. |
| .0 3BSE007913R0010 | ABB PFTL201C-20.0 / 50.0 | Needs Adaptation | Different rated load; requires recalibration and system verification. |
| .0 3BSE007913R0010 | Generic strain-gauge load cell | Not Recommended | Different measurement principle, mounting, and signal behavior. |
Benchmark notes:
- Rated load: 10.0 kN, accuracy ±0.5% FS, repeatability < ±0.05% FS.
- Overload capacity: 100.0 kN in measurement direction (1000% of nominal load).
