Product Core Brief
- Model: 16710-17
- Brand: Bently Nevada (Baker Hughes)
- Series: 16710 Armored Cable Assembly / 3300 XL Accessory
- Core Function: Armored connection cable that links the Bently Nevada 177230 vibration transmitter to the control system.
- Product Type: 3-core shielded armored cable assembly
- Key Specs: 3-pin MIL-C-5015 connector on transmitter end | terminal lug on system end | shielded armored construction | compatible with 177230 series vibration transmitters
- Condition: New Surplus / Factory New (confirm length code, connector type, and cable integrity before procurement)
Product Introduction
The Bently Nevada 16710-17 is an armored connection cable assembly used with the 177230 series vibration transmitter. It provides a rugged, shielded signal path between the vibration transmitter and the plant control system, helping protect the 4–20 mA vibration signal from mechanical damage, moisture, oil, and electrical noise.
The 16710 series is the armored cable family for Bently Nevada vibration monitoring applications. The 177230 transmitter uses a 3-pin MIL-C-5015 connector, and the 16710 cable assembly mates directly to this connector. The opposite end is typically terminated with terminal lugs for connection to a PLC, DCS, SCADA, or signal conditioning system.
The suffix “-17” identifies the cable length/configuration within the 16710 family. Exact length should be verified against the product label, packaging, or Bently Nevada documentation, as different suffixes correspond to different cable lengths. This cable is commonly used on centrifugal compressors, fans, pumps, motors, and other rotating equipment where the 177230 transmitter is installed for continuous vibration monitoring.
Key Technical Specifications
| Parameter | Value |
|---|---|
| Product Type | Armored connection cable assembly |
| Brand | Bently Nevada (Baker Hughes) |
| Model | 16710-17 |
| Series | 16710 armored cable family |
| Cable Construction | 3-core shielded armored cable |
| Transmitter Connector | 3-pin MIL-C-5015 |
| System End | Terminal lug / field wiring end |
| Compatible Transmitter | Bently Nevada 177230 series vibration transmitter |
| Typical Application | Vibration signal transmission to PLC/DCS/SCADA |
| Length Code | -17 (confirm exact length from label) |
Exact cable length, connector orientation, and terminal type should be confirmed against the installed cable label and OEM documentation.
Quality Control Process (DYNAMIC GENERATION)
- Part-number verification: Confirm 16710-17 on the cable tag or packaging.
- Visual inspection: Check armored sheath for crushing, cuts, corrosion, or deformation.
- Connector inspection: Verify the 3-pin MIL-C-5015 connector for bent pins, loose housing, or seal damage.
- Terminal end check: Inspect the terminal lug end for corrosion, loose crimps, or broken insulation.
- Continuity test: Verify 3-core continuity and shield integrity if test equipment is available.
- Compatibility check: Confirm the cable matches the 177230 transmitter connector and the installed wiring configuration.
Replacement Pitfall Guide (DYNAMIC GENERATION)
❗ Confirm this is an armored cable, not a non-armored cable. The non-armored version for 177230 is typically 16925 series. Substituting 16925 for 16710 may reduce mechanical protection and may not meet site requirements.
❗ Verify the -17 length code. The 16710 family uses different suffixes for different lengths. Using a shorter or longer cable may cause installation issues or excess slack.
❗ Check the connector type. The 177230 transmitter uses a 3-pin MIL-C-5015 connector. Cables with different connector families will not mate correctly.
❗ Do not confuse with 3300 XL proximity probe cables. The 16710 series for 177230 is not the same as extension cables used with 330100/330103/330105 proximity probes and 3300 XL proximitor systems.
❗ Maintain shield grounding. The shielded armored construction helps reduce electrical noise. Improper grounding at the system end can introduce signal interference.
❗ Inspect sealing components. If the cable assembly includes gaskets, seals, or strain relief hardware, verify they are intact to maintain environmental protection.
Compatibility Matrix & Benchmarks
| Original Model | Replacement / Alternative | Compatibility Level | Migration Notes |
|---|---|---|---|
| Bently Nevada 16710-17 | Same 16710-17 | Direct | Match length code and connector type. |
| Bently Nevada 16710-xx (other lengths) | 16710-17 | Needs Verification | Confirm required cable length and routing. |
| Bently Nevada 16925 series | 16710-17 | Not direct | 16925 is non-armored; 16710 is armored. |
| 3300 XL proximity probe extension cables | 16710-17 | Not interchangeable | Probe extension cables are for eddy-current probe systems, not 177230 transmitters. |
Benchmarks:
- 16710 series armored cable assembly for Bently Nevada 177230 vibration transmitter.
- 3-core shielded armored construction with 3-pin MIL-C-5015 connector.
- Provides mechanical and electrical protection for vibration signal transmission.
- Used with PLC, DCS, SCADA, or signal conditioning systems.
- Third-party listings that describe 16710 as a proximity probe, proximitor, or monitor module are incorrect.
