Product Core Brief
- Model: A6824 9199-00090
- Brand: Emerson
- Series: AMS 6500 / CSI 6500 Machinery Health Monitor
- Core Function: ModBus and rack interface module that reads parameters from all AMS 6500 monitors and exports them via ModBus TCP/IP and/or ModBus RTU.
- Product Type: ModBus & Rack Interface Module
- Key Specs: ModBus TCP/IP (RJ45) | ModBus RTU (RS-485, 19.2 kBaud) | 3U 1-slot | Hot-swappable | API 670 compliant
- Condition: New Original (New Surplus) / Factory Sealed
Product Introduction (Rotation Engine)
When vibration, position, and speed data stay locked inside the protection rack, operators cannot act on them fast enough. The EMERSON A6824 9199-00090 is the ModBus and rack interface module for the Emerson AMS 6500 / CSI 6500 machinery health platform. It reads parameters from all AMS 6500 monitoring modules in the rack and outputs them through ModBus TCP/IP and/or ModBus RTU serial communication.
This 3U, 1-slot module supports API 670-compliant machinery protection integration and can feed speed, vibration, gap values, alarm states, channel status, and phase data into DCS, SCADA, historians, or third-party analytics hosts. It also supports local graphical displays on the protection rack. For plants maintaining legacy Emerson/EPRO AMS 6500 systems, this interface module is useful for restoring rack-to-host communication, replacing a failed card, or standardizing spare parts across turbine and compressor trains.
Key Technical Specifications
| Parameter | Value |
|---|---|
| Product Type | ModBus & Rack Interface Module |
| Brand | Emerson |
| Model | A6824 9199-00090 |
| Platform | AMS 6500 / CSI 6500 Machinery Health Monitor |
| Communication Protocols | ModBus TCP/IP, ModBus RTU |
| Ethernet Interface | RJ45, 10BaseT |
| Serial Interface | RS-485, ModBus RTU, 19.2 kBaud, 8 data bits, even parity, 1 stop bit |
| Default IP | 192.168.255.1 |
| Form Factor | 3U, 1-slot plug-in module |
| Module Width | A6824: 6TE for IMR6000 series 19″ rack |
| Redundancy | A6824: no redundancy option; A6824-R: optional redundancy for IMR6500 series |
| Hot-Swap | Supported in compatible AMS 6500 / CSI 6500 configurations |
| Operating Temperature | 0°C to 65°C (32°F to 149°F) |
| Storage Temperature | -30°C to 85°C (-22°F to 185°F) |
| Relative Humidity | 5% to 95%, non-condensing |
| Self-Diagnostics | Hardware, power input, and hardware temperature monitoring |
| Standard | API 670 machinery protection monitoring |
Note: The A6824 9199-00090 is the non-redundant 6TE version for IMR6000-series racks. If your system requires redundant communication, the A6824-R variant should be considered instead.
Key Selling Points & Differentiators
- Direct replacement for AMS 6500 / CSI 6500 ModBus rack interface applications.
- Supports ModBus TCP/IP and ModBus RTU simultaneously for flexible DCS/SCADA integration.
- 3U, 1-slot design reduces rack footprint compared with legacy 6U cards.
- Hot-swappable and API 670-compliant for continuous protection operation.
- Factory-sealed surplus reduces DOA risk versus pulled used modules.
- Not recommended for AMS 6300 SIS overspeed racks, Ovation DCS I/O slots, DeltaV I/O slots, or non-AMS 6500 / CSI 6500 frames.
Quality Transparency SOP (DYNAMIC GENERATION)
- Visual inspection: Check front panel, RJ45, RS-485 connectors, LED indicators, PCB surface, corrosion, and factory seal integrity.
- Part verification: Confirm model A6824 9199-00090, revision, and module width against the packing list.
- Power-up test: Verify module boot, self-diagnostics, and LED status on a compatible AMS 6500 / CSI 6500 rack.
- Communication test: Verify ModBus TCP/IP connectivity via RJ45 and ModBus RTU via RS-485 with a calibrated ModBus tester or laptop.
- Rack data test: Confirm the module reads parameters from installed AMS 6500 monitoring modules.
- Final packing: Anti-static bag, moisture barrier, shock-safe boxing, and photo-documented QA.
Technical Risk Avoidance (DYNAMIC GENERATION)
❗ Do not install A6824 9199-00090 in an AMS 6300 SIS overspeed rack, Ovation DCS I/O, or DeltaV I/O. It belongs to the AMS 6500 / CSI 6500 machinery health platform.
❗ Confirm module width before ordering. A6824 is 6TE for IMR6000 racks, while A6824-R is 4TE for IMR6500 racks.
❗ Verify IP address, subnet mask, ModBus register map, baud rate, and parity before connecting to DCS/SCADA. Wrong settings can look like a hardware fault.
❗ If redundancy is required, confirm whether your rack supports A6824-R. The A6824 9199-00090 does not include a redundancy option.
Buyer’s FAQ
Is this a genuine OEM part?
Yes. This is an OEM Emerson AMS 6500 / CSI 6500 component supplied as new surplus / factory sealed. We do not rebrand or relabel third-party equivalents.
Is it new or refurbished?
Listed as New Original (New Surplus) / Factory Sealed unless otherwise stated. Any deviation in condition will be disclosed before shipment.
Can I use it as a direct replacement?
Yes, for AMS 6500 / CSI 6500 ModBus rack interface applications. Confirm your rack series (IMR6000 vs IMR6500), firmware, and communication settings first.
Does it support redundancy?
No. The A6824 9199-00090 is the non-redundant 6TE version. If you need redundant ModBus communication, the A6824-R variant should be used instead.
What warranty is included?
A 1-year functional warranty covers manufacturing defects and DOA failures. Damage from incorrect configuration, incompatible racks, improper installation, or firmware mismatch is not covered.
