Product Core Brief
- Model: 1X00416H01
- Brand: Emerson / Westinghouse Ovation
- Series: Ovation DCS Power Supply Module (WH5-2FF)
- Core Function: 240 W AC-to-DC power supply module for Ovation DCS racks.
- Product Type: Power Supply Module
- Key Specs: 90–264 VAC input | 240 W output | Overvoltage/undervoltage/short-circuit protection
- Condition: New Original (New Surplus) / Factory Sealed
Product Introduction (Rotation Engine)
A DCS rack is only as reliable as its power supply. The EMERSON 1X00416H01 is the Westinghouse Ovation WH5-2FF 240 W power supply module, designed to convert wide-range AC input into stable DC power for Ovation controllers, I/O racks, and associated system hardware.
For maintenance and procurement teams, this module matters because power supply degradation often shows up as intermittent controller resets, I/O communication loss, or unexplained rack faults. Replacing a suspect unit with a factory-sealed EMERSON 1X00416H01 avoids the risk of reusing aged capacitors, heat-stressed components, or field-damaged power modules. The wide 90–264 VAC input range also makes it easier to deploy across different plant power systems without needing a separate step-down transformer.
Key Technical Specifications
| Parameter | Value |
|---|---|
| Manufacturer | Emerson / Westinghouse |
| Product Family | Ovation DCS Power Supply |
| Module Type | WH5-2FF Power Supply Module |
| Model | 1X00416H01 |
| Input Voltage | 90–264 VAC |
| Rated Power | 240 W |
| Output Configuration | 2-output power module |
| Protection Features | Overvoltage, undervoltage, short-circuit protection |
| Operating Temperature | -40°C to 75°C |
| Storage Temperature | -40°C to 85°C |
| Dimensions | Approx. 2.5 × 10.2 × 5.1 in |
| Weight | Approx. 2.2 lb |
| Compliance | RoHS |
Note: Specific output voltage/current values vary by Ovation rack configuration. Confirm the required output against your existing module label or system documentation before replacement.
Key Selling Points & Differentiators
- Wide 90–264 VAC input supports global plant power systems without additional transformers.
- 240 W capacity covers typical Ovation controller and I/O rack power demands.
- Built-in overvoltage, undervoltage, and short-circuit protection improves rack reliability.
- Factory-sealed surplus units reduce the risk of aged capacitors, heat cycling damage, or prior field faults.
- Suitable for power generation, chemical, water/wastewater, and steel Ovation DCS installations.
- Not recommended as a generic DIN-rail power supply; it is designed for Ovation/Westinghouse rack systems.
Quality Transparency SOP (DYNAMIC GENERATION)
For surplus Ovation power supply modules, inspection focuses on electrical safety and output stability:
- Visual QA: Check housing, connectors, and ventilation areas for corrosion, burns, or cracked components.
- Anti-static handling: Seal in ESD bags with humidity indicators before shipment.
- Input insulation check: Verify no short circuits between AC input terminals and chassis ground.
- Output verification: Energize the module within rated input range and confirm stable DC output with a calibrated multimeter.
- Protection function check: Confirm overvoltage/undervoltage/short-circuit protection behavior matches expected module response.
Technical Risk Avoidance (DYNAMIC GENERATION)
❗ Match the output configuration. The EMERSON 1X00416H01 is a 2-output, 240 W Ovation power supply. Confirm the required output voltage and current against your existing module label before installation.
❗ Verify AC input range. Although it supports 90–264 VAC, applying power outside the rated range or to an incompatible rack can damage the module or downstream hardware.
❗ Do not substitute with generic power supplies. Ovation rack power modules often have specific backplane pinouts, sequencing, and protection logic. A generic replacement may fit physically but fail to power the rack correctly.
❗ Check rack load before energizing. If multiple controllers or I/O bases share the same power supply, confirm total load does not exceed the module’s rated capacity.
Buyer’s FAQ
Is this a genuine OEM module?
Yes. The EMERSON 1X00416H01 is an original Westinghouse/Emerson Ovation WH5-2FF power supply module. We supply factory-sealed surplus stock when available.
What condition is the module in?
Units are sold as New Original / New Surplus unless otherwise stated. That means unused, factory-sealed inventory rather than field-removed or refurbished hardware.
Can I use it as a direct replacement?
If your existing rack uses a WH5-2FF 240 W power supply with the same output configuration, this module should be a like-for-like replacement. Always confirm the label and rack requirements first.
How fast can you ship?
Stock availability determines lead time. For urgent DCS power failures, request expedited shipping at checkout.
Do you offer a warranty?
Yes. Warranty terms are provided at checkout. For surplus automation parts, a clear warranty window helps protect against DOA or hidden inventory damage.
