Product Core Brief
- Model: P0916JQ
- Brand: FOXBORO
- Series: I/A Series DCS
- Core Function: Detects and processes pulse signals from flowmeters and similar field devices for precise fluid flow monitoring.
- Product Type: Pulse Input / Signal Processing Module
- Key Specs: High-Precision, Digital-to-Pulse Conversion, Modular Design
- Condition: New Original (New Surplus)
Key Technical Specifications
| Parameter | Value |
|---|---|
| Module Type | Pulse Input / Signal Processing Module |
| System Compatibility | FOXBORO I/A Series DCS |
| Primary Function | Flowmeter Pulse Signal Detection & Processing |
| Key Feature | High Precision and Stability |
| Mounting | I/A Series Rack / Chassis |
| Compliance | FOXBORO Industrial Standard |
FOXBORO P0916JQ
Product Introduction
Accurate fluid flow monitoring is essential for mass balance, custody transfer, and process efficiency in continuous manufacturing. The is a specialized pulse input module designed for the I/A Series DCS. It is engineered to detect, convert, and process digital signals into precise pulse signals from various flowmeters and similar field devices.
Featuring high precision and excellent stability, this module serves as a versatile and valuable addition to any fluid flow monitoring system. Field engineers rely on the exact specification because its advanced signal processing ensures that critical flow data is captured accurately without being lost to electrical noise or signal degradation in harsh plant environments.
Key Selling Points & Differentiators
- Exact I/A Series Compatibility: Designed specifically for FOXBORO I/A Series DCS; not recommended for third-party backplanes due to proprietary signal processing protocols.
- High-Precision Flow Acquisition: Engineered to handle digital-to-pulse signal conversion with high stability, ensuring accurate flow rate calculations and totalization.
- Versatile Signal Processing: Capable of detecting and processing pulse signals from a wide variety of flowmeters and industrial devices.
- Rigorous Live Bench Testing: Every unit undergoes a 24-hour continuous load test with pulse signal simulation and frequency response verification before shipping.
- New Surplus Availability: Factory-sealed condition with verified source traceability, bypassing typical OEM lead times for discontinued I/A Series hardware.
- Anti-Counterfeit Verification: Serial numbers are checked against manufacturer databases during incoming inspection to guarantee authenticity.
FOXBORO P0916JQ
FAQ
The is designed for the I/A Series platform, but compatibility with specific sub-platforms depends on firmware and backplane revision. Always verify your system’s exact configuration and check the I/A Series hardware compatibility matrix before ordering. Mixing incompatible module revisions can cause fieldbus communication or signal processing failures.
No. While both belong to the P0916 family, the is specifically designated as a pulse module optimized for flowmeter signal processing. Substituting a different suffix without verifying the exact signal conditioning parameters can result in inaccurate flow readings or missed pulses. Always match the exact part number.
Do I need to configure the pulse scaling before installing?
Yes. The module typically requires configuration via DIP switches or software configuration in the I/A Series control builder to define the pulses-per-unit scaling factor and signal filtering parameters. I always recommend backing up your control strategy and verifying the configuration matches your flowmeter’s specifications before installation.
What types of field devices can I connect to this module?
The is primarily designed for flowmeters and similar devices that output digital or pulse signals. It is widely used in chemical processing, oil and gas refining, water treatment, and power generation facilities. Always verify the voltage levels and pulse frequency limits against your field device specifications.
Is there a warranty on this new surplus unit?
Yes. All new surplus modules come with a standard 12-month functional warranty. If the unit fails during normal operation within that period, we provide a direct replacement. We also include our internal test report with every shipment so you can verify the 24-hour load test and pulse processing results before installation.
